TQCsheen DV2500 Cone-plate Viscometer

Introduction

The Cone Plate Viscometer (CP1) is the standard test for dynamic viscosity measurements. It is faster and more accurate by using a new high-precision microprocessor control. Because non-Newtonian fluids exhibit different viscosities relative to the applied shear rate, the cone plate viscometer strictly controls them to 10,000S-1 (BS/ISO requirements) or 12,000S-1 (ASTM). These are generally thought to represent the application of paint through a roller or brush, and therefore reflect the "real world" application. 

Temperature control

Since most viscosity measurements are highly temperature sensitive, the sample is placed on a temperature control plate that can be set from 5°C to 65°C. 

The cone plate base unit does not have a cone kit. Cone kits are ordered separately. 

Advantages:

• Interchangeable cones for easy installation with quick-release chucks for easy cleaning

• Available in four units: P, cP, Pa.s or mPa.s

• Pre-selected or adjustable run time 5-59 seconds, manual or automatic start

• Fast temperature control, the warm-up time can be adjusted from 0-59 seconds

• Adjustable limit/tolerance settings with warnings

• User calibration: Viscosity (for any cone of certified oils) and temperature</p> <p>storage of 100 readings

• device, 3-digit adjustable sample identification, RS232 PC/printer data output

• Simple menu-guided/soft-key operation: cone range, parameter setting, readings, set point and plate temperature, speed, viscosity, sample identification, calibration, date

• Selectable modes: full-featured or simplified routines, security protection.

Meets standards

ASTM D4287、BS 3900-A7、ISO 2884

Host X1, power adapter X1, certificate X1, manual X1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.