MODERNER XTH-010A Temperature Humidity Cyclic Chamber -20 ℃/120L

Introduction

This equipment simulates high-low temperature and high-low temperature cycle environments. It is suitable for performing high temperature, low temperature, high humidity, low humidity, high-low temperature humidity alternation, and temperature on electrical and electronic products, lighting products, parts, materials, and Chinese electronic components. The performance and storage adaptability under cyclic changing conditions can also be used to check the sample's ability to withstand certain corrosion (non-monoxidized acids and alkalis).

Features

1. Used for high-low temperature, high-low temperature gradient, constant damp and heat and alternating damp and heat tests of industrial products and parts;

2. The refrigeration circuit can realize automatic opening and closing of the compressor and automatic adjustment of output power;

3. In addition to wet and dry bulbs, humidity sensors can also be used for humidity control;

4. Using balanced temperature/humidity adjustment method, the temperature/humidity control has high precision and fast stabilization speed;

5. The temperature control instrument is easy to operate and has a friendly interface;

6. Standard test curve USB export port and LAN communication interface.

fulfill the standard

GB/T10586-2006 Technical conditions for heat and Humidity Test Chamber

GB/T10589-1989 Technical conditions for low Temperature Test Chamber

GB/T11158-2006 High Temperature Test Chamber technical conditions

GB/T2423.1-2001 (IEC68-2-1) Test A: Low temperature test method

GB/T2423.2-2001 (IEC68-2-2) Test B: High temperature test method

GB/T2423.3-2006 (IEC68-2-3) Test Ca: Constant damp heat test method

GB/T2423.4-1993 (IEC68-2-30) Test Db: Alternating damp heat test method

GB/T2423.1-2008 Environmental testing of electrical and electronic products Part 2: Test method test A. Low temperature (IEC60068-2-1:2007)

GB/T2423.2-2008 Environmental testing for electrical and electronic products Part 2: Test method test A. Low temperature (IEC60068-2-1:2007)

GBT10592-2008 High-low Temperature Test Chamber technical conditions (temperature alternating)

GB/T2423.1-2008 Environmental testing of electrical and electronic products Part 2: Test method test A. Low temperature (IEC60068-2-1:2007)

GB/T2423.2-2008 Environmental testing for electrical and electronic products Part 2: Test method test A. Low temperature (IEC60068-2-1:2007)

GB/T2423.3-2006 Electrical and electronic product environmental testing Part 2: Test method test Cab constant temperature test (IEC60068-2-78:2001)

GB/T2423.59-200 Electrical and electronic product environmental testing Part 2: Test method test Z/ABMFh temperature, humidity and vibration three comprehensive

GB/T2423.4-2008 Electrical and electronic products environmental testing Part 2: Test method test Db alternating warm 12h+12h cycle (IEC60068-2-30:2005)

GB/T2423.9-2001 Environmental testing of electrical and electronic products Part 2: Test method Test Cb equipment with constant temperature (IEC60068-2-56)

GB/Y2423.22-2002 Electrical and electronic products environmental testing Part 2: Test method test N temperature change (IEC60068-2-14)

GJB150.3 (MIL-STD-810D) High Temperature Test Method

GJB150.4 (MIL-STD-810D) Low temperature test method

GJB150.9 (MIL-STD-810D) Damp heat test method

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.