LICHEN CXC-06 Crude Fiber Tester
High-performance corrosion-resistant parts, bottom heating, with timing alarm function, LED digital tube display, can be measured at the same time up to 6/times.
LICHEN
CXC-06
-
TIANDIXINGHUO XH-DH100 Rock Point Load Tester 0-90mm
$ 660.00 -
Jingyi JY-30A automatic swirling/spinning oil mixer, intelligent positive and negative two-way swirling/spinning vertical Stirrer
$ 2499.00 -
CHINA NBC-1220S Vertical Plug-in Life Tester, Terminal Harness Tester
$ 3478.00 -
YINUO YN-ZZ01 laboratory high Voltage digester 0.85MPa 175 degrees
$ 4747.00 -
WRS-01 heat shrinkage Tester, film and other heat shrinkage tests
$ 1465.00
Introduction
Lichen CXC-06 crude fiber analyzer is an instrument that digests samples based on the commonly used acid-base digestion method and performs gravimetric measurement to obtain the crude fiber content This instrument uses acid and alkali with accurate concentrations to digest the sample under specific conditions, and then uses ethanol to remove soluble substances. After burning at high temperature, the amount of minerals is deducted, and the content is called crude fiber. This instrument is suitable for feed, grain, cereal foods and other agricultural and sideline products that need to measure crude fiber content.
Features
⪠Smooth drainage and use of high-performance corrosion-resistant components
⪠The bottom of the reagent bottle is heated, the power is infinitely adjustable, accelerates the sample reaction, and has a timed alarm function
⪠Integrated design, the reagent container is placed on the countertop, making it easy to add liquids
LICHEN CXC-06 Crude fiber TesterSpecifications
| LIST | VALUE |
|---|---|
| Input power | AC220V 50HZ |
| Power | 3.3KW |
| Display mode | LED digital tube/voltmeter |
| Repeatability Error | Crude fiber content below 10%, absolute error ≤ 0.4; crude fiber content above 10%, relative error ≤ 4% |
| Measurement time | It takes about 90 minutes (including acid 30 minutes, alkali 30 minutes, suctionfiltration and washing about 30 minutes) |
| Measure the number of samples | Up to 6 pieces/time |
| Flask Capacity | 2 liters |
| Timer duration | 999 hours |
| Net Weight | 28kg |
| Dimensions | 620×350×700mm |
LICHEN CXC-06 Crude fiber Tester Packing list
machine X1, manual X1, certificate X1, warranty card X1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.