ASR-9012 battery thermal shock Test Chamber, volume 64L
Do the stress test of the mold shell at high temperature, touch screen control, the temperature range is normal temperature~ 150 ℃, the temperature display accuracy is ± 0.1 ℃, and the inner box size is 400 * 400 * 400mm.
AISRY
ASR-9012
-
KOSON KS-75S intelligent in-situ double shear instrument, masonry Detector 75KN thrust, Bluetooth printing
$ 831.00 -
CHINA NBC-LRCJ11 Impact Toughness Tester Pendula Impact Tester
$ 666.00 -
LEICI KDN-1 Automatic Kjeldahl Nitrogen Analyzer
$ 2818.00 -
Jinan HORIZON F-35 Backpressure High Temperature Cooking Instrument
$ 2898.00 -
KOSON KS-150S intelligent in-situ single shearing instrument, masonry shear resistance Detector 150KN thrust, Bluetooth printing
$ 831.00
Applications
This machine can be used for mold body shell stress test under high temperature, thermal (shock) abuse test and heating test.
After the battery (pack) is fully charged, test it at an ambient temperature of 70±2°C for 7 hours, then remove it from the oven, and cool it down to room temperature. Only when the battery casing does not undergo physical deformation that exposes the inside to the outside can it be qualified
Place each fully charged single battery in a natural convection or forced ventilation oven. The oven rises to 130±2°C at an average rate of 5±2°C. Before the end of the test, the battery is kept at this temperature for 10 minutes. No explosion, no fire as qualified
AISRY ASR-9012 Battery thermal shock Test ChamberSpecifications
| LIST | VALUE |
|---|---|
| Temperature control method | Touch screen control |
| Temperature range | Room temperature~ 150 ℃ |
| Temperature display Accuracy | ±0.1℃ |
| Inner box size | 400*400*400mm |
| Heating rate | (5 ± 2) ℃/min (nonlinear no-load, average temperature rise) |
| Inner box material | 304 stainless steel |
| Insulation device | High efficiency compression thermal insulation cotton |
| Safety Devices | The first over-temperature alarm, MCCB overload protection, etc |
| Control system | Temperature to time, time to time, beep to stop |
| Viewing Window | Double-layer tempered Glass Viewing Window, size 250 * 250 * 5MM |
| Exhaust flue | Vane design can jump out of the air Volume |
| Explosion-proof port design | Open on the side of the equipment, surrounded by high temperature sealant strip seal, insulation layer using soft aluminum foil and Glass cotton |
| explosion-proof door | Stainless steel explosion-proof door lock, and equipped with chain lock for secondary protection |
AISRY ASR-9012 Battery thermal shock Test Chamber Packing list
complete-built unit X1, manual X1, certificate of conformity X1, warranty card X1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
