CHINA Small hot-melt adhesive Continuous Film Applicator NBC-6025 Continuous coater

The continuous hot melt adhesive coating and laminating experimental machine is a high-precision modular coating station assembly that can be used for continuous coating and proofing in the laboratory or small batch production. It can directly apply hot melt pressure-sensitive adhesive on the heat-resistant substrate, or you can first apply the adhesive on the release paper, and then transfer the adhesive film to the surface of different materials, such as paper, plastic, and models. Metal film, etc.

Characteristics

• The whole machine is assembled and assembled with a high-precision modular coating station structure.

• Use a dial indicator as the dividing head to precisely fine-tune the coating gap between the upper and lower rubber wheels to control the coating thickness . The minimum glue thickness is 0.01mm. After the thickness is set, the rubber wheel can be locked directly to prevent the gap from changing.

• The maximum coating width is 300mm (effective coating width 280mm). The coating width is adjusted by two Teflon baffles in the glue tank. It can be coated and glued to any length and can be automatically rolled up.

• Continuously variable forward and reverse speed, recommended coating speed: 4.5m/min (speed 2-4.5m /min adjustable) The unwinding reel can adjust the knob to change the tension of the unwinding reel. The take-up reel can be adjusted with mechanical tension control.

• The heating rod, upper rubber wheel and rubber tank can be quickly disassembled and separated from the machine body to remove residual glue.

whole machine X1, glue melting furnace x1, manual X1, certificate X1, warranty card X1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.