SHUCHANG SC-MI-B Melt Flow Indexer 4.3 inch touch screen model
4.3-Inch touch screen model, in line with GB3682-2000 standard, the diameter of the discharge port is Φ2.095 +/- 0.005 mm, and the standard test force is grade 8, which is suitable for measuring plasticity polymers.
ShuChang
SC-MI-B
Applications
The melt flow rate meter is an instrument for measuring the flow properties of plastic polymers at high temperatures according to the test method of GB3682-2000. It is used for high polymers such as polyethylene, polypropylene, polyoxymethylene, ABS resin, polycarbonate, and nylon fluoroplastics. Determination of the melt flow rate of a substance at high temperature. It is suitable for the production and research of factories, enterprises and scientific research units.
Structure and Principle
The melt flow rate meter is an extrusion plastic meter. It uses a high-temperature heating furnace to make the measured object reach a molten state under specified temperature conditions. The test object in this molten state is extruded through a small hole of a certain diameter under the load gravity of the specified weight. In the plastic production of industrial enterprises and the research of scientific research units, "melt (mass) flow rate" is often used to express the physical properties of polymer materials such as fluidity and viscosity in the molten state. The so-called melt index refers to the average weight of each section of the extruded sample converted into the extruded amount in 10 minutes.
The instrument consists of a heating furnace and a temperature control system and is installed on the base of the fuselage (column).
The temperature control part adopts the single-chip microcomputer to adjust the power and control the temperature. It has strong anti-interference ability, high temperature control precision and stable control. The heating wire in the furnace is wound on the heating rod according to a certain rule to minimize the temperature gradient to meet the standard requirements.
Standard test force (eight grades)
Level 1: 0.325 kg= (piston rod + weight tray + heat insulation sleeve + No. 1 weight body) =3.187N
Level 2: 1.200 kg=(0.325+No. 2 0.875 weight)=11.77 N
Level 3: 2.160 kg=(0.325+No. 3 1.835 weight)=21.18 N
Level 4: 3.800 kg=(0.325+No. 4 3.475 weight)=37.26 N
Level 5: 5.000 kg=(0.325+No. 5 4.675 weight)=49.03 N
Level 6: 10.000 kg=(0.325+No. 5 4.675 weight+No. 5 5.000 weight)=98.07 N
Level 7: 12.000 kg=(0.325+No. 5 4.675 weight+No. 6 5.000+No. 7 2.500 weight)=122.58 N
Level 8: 21.600 kg=(0.325+No. 2 0.875 weight+No. 3 1.835+No. 4
3.475+No. 5 4.675+No. 6 5.000+No. 7 2.500+No. 8 2.915 weight)=211.82 N
ShuChang SC-MI-B Melt Flow IndexerSpecifications
| LIST | VALUE |
|---|---|
| Discharge port diameter | Φ2.095±0.005mm |
| Discharge port length | 8.000±0.025mm |
| Barrel inner diameter | Φ9.550±0.025mm |
| Cartridge length | 152±0.1mm |
| Piston rod head diameter | 9.475±0.015mm |
| Piston rod head length | 6.350±0.100mm |
| Temperature range | 50~400℃ |
| Weight Mass relative error | ≤0.5% |
| Standard test force | eighth level |
| Thermostatic Accuracy | ±0.5℃ |
| Power Supply | 220V±10% 50Hz |
| Environment temperature | 10℃-40℃ |
| Environment Relative Humidity | 30%-80% |
| Instrument Dimensions | 250×350×600mm |
ShuChang SC-MI-B Melt Flow Indexer Packing list
complete-built unit X1, manual X1, certificate of conformity X1, warranty card X1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
FAQ
- Application of Melt index meter on plastic
- Melt flow performance and processing performance of ABS Resin by Melt index meter
- Polyethylene (PE) - Determination of melting index
- Melt index meter volume method and mass method
- Determination of thermal plasticity Resin melt flow rate
- Principle and application of polycarbonic acid ester Melt index meter
- Determination of Melt Index of Electrocopying Dry Toner by Melt Index Tester