DONGRU DR13S Anti-corrosion and fireproof Coating Thickness Gauge 100~13000μm
Adopt alloy probe, support continuous and single measurement, store 2000 data, have upper and lower limit alarm function, automatically identify the substrate, Measurement accuracy +/- 3% H + 2 μm.
DongRu-
HUINUO BP-1500FN paints Thickness Gauge, 1500μm thickness measurement integrated dual-use standard type
$ 209.00 -
IPRE CT150 Coating Thickness Gauge Measurement range 0~1500μm
$ 236.00 -
List Magnetik Pocket TOP-CHECK FE-B Pocket platings Thickness Gauge
$ 1512.00 -
German EPK MiniTest 735 F1.5 statistical coating Thickness Gauge, thickness measurement 0~1500μm
$ 2264.00 -
DONGRU DR5000S Coating Thickness Gauge 0~5000μm
$ 259.00
Introduction
DR13S Coating Thickness Gauge is a large-range coating Thickness Gauge, which is a professional non-destructive testing instrument mainly used to measure the thickness of coated coatings on the surface of magnetic metal materials. It adopts the principle of magnetic thickness measurement, which can quickly and non-destructively measure the thickness of non-magnetic coatings (galvanized, chrome, enamel, rubber, powder, paint, electrophoresis, enamel, plastic spraying, etc.) on magnetic metal substrates (such as steel and iron). Coatings, anti-corrosion and fire-proof coatings, etc.), very suitable for measuring ultra-thick anti-corrosion coatings on various large workpieces, the range can reach 13MM, Applications: widely used in coating industry, manufacturing industry, petroleum, chemical industry, shipbuilding , fire protection engineering, construction industry, commodity inspection and other testing fields.
Features
Large range: 100-13000μm (0.1-13mm)
Simple operation, fast test speed, good sensitivity and high measurement accuracy
Alloy probe, wear-resistant and pressure-resistant, durable, accurate
There are two measurement methods: continuous measurement and single measurement
There are four statistical functions: maximum value (MAX), minimum value (MIN), average value (MEA), measurement times (No)
Large-capacity storage, can be stored in 10 groups, 200 in each group, and can store 2000 data in total
Stored data store view delete function
Three calibration methods: zero point calibration, two-point calibration, multi-point calibration
Upper and lower limit alarm function (can be set in single measurement mode)
The operation process is marked by a beep (in single measurement mode)
Automatic identification of ferrous and non-ferrous substrates
Metric and imperial conversion μm/Mil
Sunlight mode (used under strong light)
Chinese and English bilingual version
2.3-inch large color screen large font size display
Manual/automatic shutdown function
Bluetooth synchronous data transmission function (customized)
DongRu DR13S Coating Thickness GaugeSpecifications
| LIST | VALUE |
|---|---|
| Operating Environment | Temperature: 0 ℃ -60 ℃, Humidity: 20% RH - 90% RH, use in environment without strong magnetic field |
| thinnest matrix | 1mm |
| Minimum matrix area | F32mm |
| Minimum radius of curvature | Concave 10mm; Concave 16mm |
| Dimensions | 130(L)×70(W)×25(H)mm |
| Weight | 260g |
| Power | Three (7) alkaline batteries |
DongRu DR13S Coating Thickness Gauge Packing list
host X1, manual X1, certificate X1, warranty card X1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
FAQ
- Dry-film thickness measurement: magnetic and mechanical methods
- Application, Principle Introduction and Precautions for Selection of Pipeline Thickness Gauges
- Basic principle and application scenario of steel Coating Thickness Gauge
- Principle, application and selection of traffic coatings Coating Thickness Gauge
- Principle, application and selection of stainless steel paints Coating Thickness Gauge
- Principle, Application and Selection of Coating Thickness Gauge for inner wall of small pipe
- Analysis of performance, application and development prospect of epoxy resin
- Study on electrical performance of powder coatings
- ActiveHG/T 3240-2007
- ActiveQJ 990.3A-2011
- ReplacedNF EN ISO 2808-2007
- ActiveGB/T 42541-2023
- ActiveGB/T 13912-2020
- ActiveGB/T 7991.5-2014
- ActiveGB/T 13448-2019
- ActiveISO 4526-2004
- AbolishGB/T 13448-2006
- ISO 6158-1984
- ActiveISO 1461-2022


DR13S






