KAIRDA NDT361 Penetrable coating Thickness Gauge 0.15-20 mm
Speed of sound and single point Adjustment, support I-E, E-E mode, minimum thickness up to 0.15mm, LED backlight display, 500 Data storage functions.
KairDa
NDT361 (0.15-20 mm steel)
-
LEEB TT300 Ultrasonic Thickness Gauge Measurement range 1-250mm
$ 242.00 -
DUBAN DB22-TM240T3 Penetrating coating Ultrasonic Thickness Gauge
$ 426.00 -
Mattel MT180 wearable coating Ultrasonic Thickness Gauge coating Thickness range 3~ 30mm
$ 487.00 -
Defelsko Positector200 Standard Ultrasonic Coating Thickness Gauge D Standard 200D1-E
$ 3183.00 -
IPRE UT700 Ultrasonic Thickness Gauge measurement range 3~ 200mm
$ 506.00
Applications
This ultrasonic Thickness Gauge can accurately measure various plates and various processed parts. It can be widely used in various fields such as petroleum, chemical industry, metallurgy, shipbuilding, aviation, aerospace, and special inspection institutes.
Features
1. Using "clutter flying technology", on the one hand, it can realize the measurement of ultra-thin parts, and the minimum thickness (steel) can reach 0.15mm; on the other hand, it can realize high-precision thickness measurement, and the highest resolution can reach 0.001mm; Extremely high measurement precision and indexing accuracy.
2. Two measurement modes I-E mode and E-E mode are optional;
IE: Bottom wave-echo mode meets conventional thick workpiece measurement; EE: Echo-echo mode meets thin workpiece measurement with high precision
3. It can measure through the surface coating;
4. Put the probe on the test block of the Thickness Gauge and press the button to automatically adjust to zero;
5. With LED backlight display, it is convenient to use in dimly lit environments;
6. It has the function of sound velocity calibration (reverse measurement of sound velocity) or single point calibration;
7. It is possible to set the alarm setting and difference mode;
1) The thickness range can be set, and it will automatically alarm when it exceeds the upper and lower lines.
2) Difference mode: input the known workpiece thickness value and display the actual workpiece thickness difference
8. Metric and imperial conversion: mm and inch can be switched units
9. Divide 5 arrays, which can store 500 thickness values for storage, viewing and deletion;
10. Can store the sound velocity of 5 different materials
11. Imported 15MHz single crystal delay probe is used, which is suitable for measuring flat thin plates
KairDa NDT361 (0.15-20 mm steel) Ultra-thin part Thickness GaugeSpecifications
| LIST | VALUE |
|---|---|
| Measurement range | 0.15mm~ 20mm (steel) (single crystal probe) |
| Display resolution | 0.001mm |
| Measurement frequency | 15MHz |
| Speed of sound | 1000-9999m/s |
| show | 128 * 64 LCD display, LED backlight |
| index error | +/- 0.005mm (below 3mm) +/- 0.01mm (below 20mm) |
| Automatic shutdown | Automatic shutdown after 5 minutes of no operation |
| Operating temperature | -10 ℃~ + 50 ℃, up to -20 ℃ with special requirements |
| Operating Voltage | Two 5 #1.5V AA batteries, when the power is insufficient, there is a low Voltage prompt |
| Operation time | Alkaline battery lasts up to 200 hours (without backlight) |
| Dimensions | 153mm*67mm*26mm |
| Total Weight | 220g |
KairDa NDT361 (0.15-20 mm steel) Ultra-thin part Thickness Gauge Packing list
host × 1, coupling agent × 1, manual × 1, certificate × 1, 15M single crystal probe × 1, alkaline battery 1.5V × 2, packing list × 1, warranty card × 1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.