Yunda YD-NZY MIT flexural strength Tester to detect paper fatigue resistance

Introduction

Paper Testing Instrument MIT Folding Endurance Tester is a testing tool used to test the folding fatigue performance of paper, through which the number of times and folding endurance of paper can be tested. The instrument can also be used for testing the folding fatigue resistance of textiles, plastic films, wires and other products. It is a professional testing tool for paper production enterprises, packaging production enterprises, textile production enterprises, wire rod production enterprises, etc. to test product quality.

The MIT folding Tester places a bendable sample under a constant tension load, and then folds the sample to an angle of 135° in either direction at a rate of 175 double folds per minute until the sample breaks at the crease until. The instrument can be adjusted between 20 and 200 double folds per minute, allowing a maximum folding angle of 135 degrees.

Standards

GB 457, GB 2679.5, QB 1049, ISO 5626, TAPPI T 511, ASTM D2176, BS ISO 5626

Application

Paper, cardboard, thin paper, plastic film, metal foil, other, sheet material less than 1mm thick

Features

● Ease of use

● Adjustable between 20 and 200 double folds per minute

● Compress the spring with a weight of corresponding tension to achieve the desired tension

● Color touch screen, easy to operate

host X1, manual X1, certificate X1, warranty card X1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.