TRUIT TR 3001/100/50 thin Film Applicator 50μm
Single-sided Moulding, wet film thickness 50μm, made of wear-resistant and corrosion-resistant alloy steel, effective Spreader width 100mm, support non-standard customization.
TRUIT
TR 3001/100/50
-
TRUIT TR 3004/160/3 4-sided Coating Applicator 20/40/60/160μm
$ 212.00 -
HuiNuo SZQ-230 50/100/150/200 4-sided Applicator Resin inks Moulding Proofing
$ 482.00 -
TRUIT TR 3004/80/7 Quad Film Applicator 50/100/150/200μm
$ 185.00 -
HuiNuo QTG 100/150μm Double Sided Applicator Film Applicator film accuracy +/- 2μm Spreader width 150mm
$ 206.00 -
CHINA SZQ-125 single-sided experimental Film Applicator stainless steel material film thickness 125μm
$ 159.00
Introduction
Thin layer Film Applicators provide precise control of wet or dry film thickness. During routine quality control and research and development tests, the coating's hiding power, opacity, scrub resistance, anti-sag performance and other quality tests require a consistent and repeatable coating.
TR 3001 series is a single-sided Wet Film Applicator with an effective coating width of 100mm and a Total length of 130mm, made of high-quality wear-resistant and corrosion-resistant alloy steel. The single-sided Applicator has only one coating thickness, which can be used for manual coating or with an automatic coating machine. It is suitable for preparing uniform thin film coatings for coatings, polymer materials, adhesives, inks, etc., and testing coating performance. In addition, the preparer supports non-standard calibration.
Series
| order number | Thickness (μm) |
| TR 3001/100/15 | 15 |
| TR 3001/100/20 | 20 |
| TR 3001/100/25 | 25 |
| TR 3001/100/30 | 30 |
| TR 3001/100/37 | 37.5 |
| TR 3001/100/40 | 40 |
| TR 3001/100/50 | 50 |
| TR 3001/100/60 | 60 |
| TR 3001/100/75 | 75 |
| TR 3001/100/80 | 80 |
| TR 3001/100/100 | 100 |
| TR 3001/100/125 | 125 |
| TR 3001/100/150 | 150 |
| TR 3001/100/200 | 200 |
| TR 3001/100/250 | 250 |
| TR 3001/100/300 | 300 |
| TR 3001/100/400 | 400 |
| TR 3001/100/500 | 500 |
| TR 3001/100/600 | 600 |
TRUIT TR 3001/100/50 Single-sided ApplicatorSpecifications
| LIST | VALUE |
|---|---|
| Effective Application Width | 100mm |
| material | High quality wear-resistant and corrosion-resistant alloy steel |
| Total length | 130mm |
| thickness | 50µm |
TRUIT TR 3001/100/50 Single-sided Applicator Packing list
Applicator X1, certificate X1, manual X1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
