TRUIT TR 3060/2 Coating Anti-Sag Meter
Film thickness 250/275/300/325/350/375/400/425/450/475μm, wear-resistant and corrosion-resistant alloy steel material, in line with GB/T 9264, ASTM D 3730 standards.
TRUIT
TR 3060 / 2
TR 3060 / 4
TR 3060/5
TR 3060 / 1
TR 3060/3
Introduction
The sagging Tester is used to measure the flow and thickening of the upper end of the wet film to the lower end in a vertical state, so as to select an appropriate wet film thickness by controlling the physical properties of the paint to ensure a uniform film thickness. The sagging performance is beneficial to the coating control of vertical, corner, round hole and arc workpieces. The sag meter is made of high-quality wear-resistant and corrosion-resistant alloy steel to ensure its durability and accuracy.
The coating film thickness of TR 3060/3 Sag Applicator is 250-275-300-325-350-375-400-425-450-475 μm. The design complies with GB/T 9264 and ASTM D 3730 standards.
Standards
GB/T 9264, ASTM D 3730 standard
Series
| model | Thickness (μm) |
| TR 3060/1 | 50-75-100-125-150-175-200-225-250-275 |
| TR 3060/2 | 250-275-300-325-350-375-400-425-450-475 |
| TR 3060/3 | 450-475-500-525-550-575-600-625-650-675 |
| TR 3060/4 | 650-675-700-725-750-775-800-825-850-875 |
| TR 3060/5 | 850-875-900-925-950-975-1000-1025-1050-1075 |
TRUIT TR 3060 / 2 Anti-Sag MeterSpecifications
| LIST | VALUE |
|---|---|
| material | High quality wear-resistant and corrosion-resistant alloy steel |
| Dimensions | 120mm×20mm×20mm |
| Film thickness quantity | Article 10 |
| Wet-film width | 6mm |
| strip film spacing | 1.5mm |
| Adjacent film thickness difference | 25 μm |
| Film thickness | 250-275-300-325-350-375-400-425-450-475 （ μm ） |
TRUIT TR 3060 / 2 Anti-Sag Meter Packing list
Anti-Sag Meter X1, Certificate X1, Manual X1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
