JFL QXD 0-50 Grindometer (double-channel)

JFL QXD 0-50 double-channel Grindometer 5μm Graduation

The QXD 0~50μm Grindometer produced by JFL has 2 grooves, the maximum fineness range is 50μm, and the sub-scale is 5μm. The QXD 0-50 scraper Hardness Gauge is made of cemented carbide steel, which is resistant to abrasion and is used for coating pigment fineness detection.

Brand

SKU: NB004330

JFL

Model

QXD 0-50

Get Quote

JFL shop

Information

Datasheet Video Catalog

What else did others buy

TRUIT TR 1202/025 double-channel pigment Fineness gauge 0~25μm

$ 187.00
CHINA QXD-15 single-channe Grindometer Zirconia Ceramic Material 0~15μm

$ 428.00
TRUIT TR 1203/025 wire-channel Fineness gauge 0~25μm

$ 187.00
TQC VF2107 single-channe grinding Fineness of Grinding Gauge 0~100μm with calibrated certificate

$ 1044.00
TQCVF2124 double-channel fineness grindometer 0-500µm

$ 1524.00

Genuinegoods

JFL QXD 0-50 Grindometer (double-channel)Overview
Specifications
Comments
FAQs

QXD 0-50

Grindometer (double-channel)

Introduction

Jinfulun QXD 0-25/50/100/150 Fineness Meter is a QXD double-slot fineness scraper meter for detecting particle fineness . It uses hard alloy steel with good wear resistance and hardness, which is not easy to wear. The QXD Fineness Meter is produced in strict accordance with the requirements of the "Scraper Fineness Meter" of the Ministry of Chemical Industry's special measuring instrument calibration regulations, and meets the standards of GB/T1724-93, GB/T13217.3-91.

The measuring ranges of the QXD 0-25/50/100/150 double-slot fineness scraper gauge are 0-25Î¼m, 0-50Î¼m, 0-100Î¼m, and 0-150Î¼m respectively.

Applications

QXD 0-25/50/100/150 double-slot fineness scraper meter is used to measure the fineness of pigments and impurities in paints and paint slurries. It is used to measure the fineness of dispersed products during production, storage and application. Test and control product quality.

product material

QXD 0-25/50/100/150 double groove fineness scraper gauge is made of carbide steel.

Product actual pictures

Appearance of Jinfulun QXD 0-25/50/100/150 Fineness Meter

Jinfulun QXD 0-25/50/100/150 Fineness Meter details

JFL QXD 0-50 Grindometer (double-channel)Specifications

LIST	VALUE
Scraper type	double-channel
Number of grooves	2
range	0~50μm
Scale unit	μm
scraper material	Carbide steel
Scraper size	1555013mm
Groove size	13*120mm
Drawdown blade size	68406.5mm
Applicable standards	GB/T 1724-93、GB/T 13217.3-91
Net Weight	0.9kg
Graduation	5μm

JFL QXD 0-50 Grindometer (double-channel) Packing list

Fineness meter x1, doctor blade x2, Encasement box x1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.

FAQ

[Q]

Is this Kingflun 2 paths scraper Fineness meter only in microns?

[A]

Hello, yes, only micron units.

[Q]

Does the Fineness gauge meet the specifications of JB/T9385?

[A]

Model QXD 0-50 Fineness gauge

[Q]

Gravure plate Printing ink Fineness inspection which?

[A]

Gravure plate Printing ink can be selected from 0~ 50μm scraper Fineness meter (domestic Qxp-50), one path or 2 paths can be selected according to their own requirements. reference standard GB/T 13217.3

[Q]

Can this instrument be used to determine the Fineness of silver and platinum slurry?

[A]

Yes, not only silver and platinum slurries, but also most precious metal slurries can be determined by a scraper Fineness meter.

[Q]

Fineness of one path or two paths?

[A]

There is no doubt that 2 paths will be better. The 2 paths Fineness meter can provide a direct comparison of the two preparation results at the same time, and the two are not affected by objective conditions such as time and temperature and subjective conditions such as scraping speed and force. For Fineness detection efficiency and calculation accuracy will be greatly helpful. Of course, the price will be more expensive than one path.