CHINA Micro Coil Automatic Spraying and Coating Machine TBJ-JCPT-DJ1 Customized

Introduction

This machine is mainly suitable for Spreader test of drum substrates.

Coil automatic spray coating machine is an automated equipment used for lame plating and Spreader of coils. It is mainly used to Spreader liquid or gluing agent to the surface of the coil to achieve uniform coating coverage or gluing.

Coil automatic spray coating machine usually consists of the following main components:

Web Conveyor System: Used to unwind the web from the reel and transfer it to the lame plating or Spreader area. Conveyor systems usually include gears, tensioners, and web guides.

Lame plating or Spreader system: Used to evenly spray Spreader liquid or gluing agent to the surface of the coil. A lame plating or Spreader system usually includes a nozzle, spray head or scraping device, etc.

Control system: Used to control parameters such as coil transfer speed, Flow rate of lame plating or Spreader liquid and position of lame plating or Spreader. Control system usually includes control panel, Sensors and automatic control devices.

Deviation correction function:The Principle of the automatic coil spray coater is to achieve uniform coverage or gluing of the coil surface by controlling the coil transfer speed and the spraying or Spreader parameters of the Spreader liquid. The operator can set the required lame plating or Spreader parameters through the control panel, such as WFT, lame plating speed and Spreader width, etc., to meet specific production needs.

Structure

Main part configuration:

(1) Unwinding unit

Type: single station

Effective unwinding width: 300mm

Effective unwinding diameter: ≤ φ400mm

Put the reel: inflatable shaft

Unwinding tension control: tension controller automatic control

(2) Spreader unit:

Spreader: lame plating

Lame plating height: can be adjusted 0-200mm

(3) curing unit:

Type: Column arch bridge type;

Heating: 1 meter drying tunnel

(4) Winding unit

Type: single station

Effective winding width: 300mm

Effective winding diameter: ≤ φ400mm

Reel: inflatable shaft

(5) Correction unit

(6) Automatic feeding system

Feed filling material: 304 stainless steel

Coater x1, doctor blade x1, wire rod x1, automatic feeding system x1, automatic lame plating system x1, tension system x1, deviation correction module x1, rewinding and unwinding x1,

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.