CHINA BLD-1006 10 sets of tape retention Tester, room temperature adhesion Tester

Introduction

The normal temperature adhesion Tester performs a static load test on the adhesive force of the tape, and automatically times the time the tape can be maintained under a certain load to confirm the effectiveness of the tape's adhesion.

experiment procedure

1. A 1-inch wide strip of tape is attached to the specified SUS#304 stainless steel plate;

2. Use a 2kg standard rolling roller to roll back and forth three times at a speed of about 300mm per minute to make the tape evenly adhere to the steel plate;

3. Hang the steel plate on the hook of the testing machine, clear each timer and add the specified weight;

4. When the tape falls from the steel plate, the timer automatically retains the test time;

5. Record the test time to evaluate the durability of the tape's adhesion.

Note: before hanging the weight, you must confirm whether the timer is cleared!

Standards compliant

• GB 23441-2009 Self-adhesive polymer modified asphalt waterproofing membrane

• GB/T 4851-2014 Pressure-sensitive adhesive tape holding test method

• GB/T 35467-2017 Wet laid waterproofing membrane

machine X1, manual X1, certificate X1, warranty card X1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.