HUITAI DZF-6020 Vacuum Oven 1 Shelf volume 20L with inert gas intake valve

Overview

Huitai DZF-6020 vacuum Drying Oven is widely used in biochemistry, chemical engineering, agricultural research, environmental protection and other research and application fields, for powder drying, baking, disinfection and sterilization of various glass containers. It is especially suitable for fast and effective drying of dry heat-sensitive, easily decomposable, easily oxidized substances and complex composition items.

Product technical advantages

 The vacuum environment greatly reduces the boiling point of the liquid that needs to be expelled, so vacuum drying can be easily applied to heat-sensitive substances;

 For samples that are not easy to dry, such as powders or granular samples, the use of vacuum drying can effectively shorten the drying time;

 All kinds of mechanical parts with complex structures or other porous samples are cleaned and then used by vacuum drying method, and no participating substances are left after complete drying;

 It is safer to use, and completely eliminates the possibility of oxide explosion when exposed to heat under vacuum or inert conditions;

 In contrast to normal drying, which relies on air circulation, powdered samples are not blown or moved by flowing air.

Features

1. The heating element is located on the internal partition of the box, and the heating time is shortened by 50% compared with the traditional vacuum Drying Oven.

2. Large-screen LCD screen, multi-group data display on one screen, menu-based operation interface, simple to understand, easy to operate.

3. The aluminum shelf stamped by special technology has high temperature non-oxidation and fast heat conduction. Minimize heat loss

4. The cuboid studio makes the effective volume utilization rate large, and the microcomputer temperature controller is accurate and reliable in temperature control.

5. Tempered, bulletproof double-glazed door to observe the objects in the studio, at a glance, can be filled with inert gas inside.

6. The closing tightness of the door can be adjusted by the user at will, and the silicone rubber door sealing ring is integrally formed to ensure a high vacuum degree in the box.

7. The work room is made of stainless steel plate, and enclosure is made of good cold-rolled steel plate, and the surface is electrostatically sprayed.

8. Storage, heating, testing and drying are carried out in an environment without oxygen or filled with inert gas, which will not lead to oxidation.

Optional

Intelligent program controller

Inert gas inlet valve

Gas-liquid separator

Vacuum drying tank

Cabinet(6020/6030/6050)

Vacuum pump - 2XZ-2

Vacuum pump - 2XZ-4

Comparison of parameters of DZF series vacuum Drying Oven

Host X1, fuse X2, certificate X1, manual X1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.