British Sheen Ref. 504/50 wide/single-channe Grindometer

Bottom of the warehouse, half price.

Brand

SKU: NB004378

SHEEN

Model

Ref.504/50

Price

$ 619.00

Promotion

Service

The delivery and service By NBchao.Com

Get Quote

SHEEN shopSE

Information

Datasheet RFQ Contract

What else did others buy

Pushen QXD-100um single-channe Lithium Battery Paste Fineness of Grind Gauge 0-100μm

$ 162.00
TRUIT TR 1201/100 single-channe Fineness gauge 0~100μm

$ 167.00
Germany Erichsen 232 imported Fineness Meter 0~50μm Hegman Fineness Meter

$ 823.00
CHINA QXD-25 zirconia ceramic fineness gauge single-channe Fineness gauge 0~25μm

$ 431.00
TQC VF2118 double-channel fineness grindometer 0-250 µm with calibrated certificate

$ 1343.00

Genuinegoods

SHEEN Ref.504/50 Fineness MeterOverview
Specifications
Comments
FAQs

Ref.504/50

Fineness Meter

Bottom of the warehouse, half price.

Grinding of solid raw materials within coatings, pigments, inks, or food formulationsQuality is important for a good spread. The high-precision Fineness Meter produced by Xinying Company is made of hardMade of stainless steel for long-term durability and reliability.

The instrument is available with single or double slots and is engraved with 2 sets of graduations: 0-25, 0-50 or0-100 microns and 8-6, 8-4 or 8-0, respectively HegmanUnit. To test, pour a small amount of product into the deep end and use a spatula to compareThe shallow end of the scrape, too large particles and their paths are shown in the position on the scale can beThe size of the measured particles is read out and divided.

Sheen fineness plates

peculiarity

High-precision machining, 175 x 63 x 12 mm

Standard equipment: scraper, leather carrying case.

Meet the criteria

ASTM Standard D333, 1210

ISO 1524

SHEEN Ref.504/50 Fineness MeterSpecifications

LIST	VALUE
Scraper type	Wide-channel
Number of grooves	2
range	0~50μm
Scale unit	μm、Hegman
scraper material	stainless steel
Scraper size	1756312mm
Applicable standards	S 3900 C6；EN21524；ISO 1524；ASTM D1210

SHEEN Ref.504/50 Fineness Meter Packing list

Scraper x1, doctor blade x1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.

FAQ

[Q]

I want to do a test on the GB/T13217.3 standard. Is this Fineness meter okay?

[A]

Sure

[Q]

Is there a Gardco Fineness Meter?

[A]

Hello, this brand Fineness meter has not yet entered NBchao. Com Mall. You can consider other brands of Fineness meter in the mall.

[Q]

What is the reading method of scraper Fineness meter?

[A]

Please make the reading under the premise of ensuring the correct use of the scraper Fineness Meter. For the sample that meets the product standard viscosity index, mix it well with a small paint blender, and then drop a few drops on the deepest part of the scraper Fineness Meter to fill the groove and have a little excess. Take a double hand-held scraper and place it horizontally on the upper end (at the edge of the sample) of the polishing plate (scraper Fineness Meter) so that the scraper is in vertical contact with the surface of the polishing plate. Within 3s, pull the scraper from the deep part of the groove of the scraper Fineness Meter to the shallow part, so that the paint sample fills the groove and there is no residual paint on the plate. After the scraper is pulled, immediately (no more than 5s) make the line of sight at a 15-30 ° angle to the plane of the trench, observe the uniform exposure of particles in the trench to the light, and write down the reading (accurate to the smallest division)

+SHEEN Ref.504/50 Fineness Meter Big data

+SHEEN Ref.504/50 Fineness MeterSimilar products

+SHEEN Ref.504/50 Fineness MeterKnowledge

+SHEEN Ref.504/50 Fineness MeterStandard

+Navigation

British Sheen Ref. 504/50 wide/single-channe Grindometer

SHEEN Ref.504/50 Fineness MeterOverview

peculiarity

Meet the criteria

SHEEN Ref.504/50 Fineness MeterSpecifications

SHEEN Ref.504/50 Fineness Meter Packing list

FAQ