PUSHEN /Pushen SZQ-500 Single Side Scraping Film Applicator 500 microns

Introduction

The wet film thicknesses prepared by Pushen single-sided wiper film preparation machines are SZQ-300, SZQ-400, SZQ-500 and SZQ-700 are 300μm, 400μm, 500μm and 700μm respectively, and the coating width is 10mm. The single-sided Wet Film Applicator is a stainless steel bird-shaped applicator, which is suitable for coating samples on flat surfaces to measure the color, hiding power and other properties of the coating film, and has good corrosion resistance.

Features

SZQ-300/400/ 500 /700 single-sided Wet Film Applicator is made of hard stainless steel, which can apply a film layer of specific thickness and width on a flat and solid substrate.

Each Film Applicator has a high-precision fixed film thickness to ensure accuracy, and a variety of film widths can be customized.

Introduction of paint leveling

The so-called leveling property of the coating refers to the smooth and smooth state of the coating film after the coating is applied. The surface with good leveling property should have no irregularities such as orange peel, brush marks, ripples, and shrinkage cavities. Usually people directly observe with the naked eye to compare the sample with the standard sample in parallel to judge the quality of the leveling property of the coating film. This method varies from person to person and is highly subjective.

The importance of coating

The reliability of laboratory tests is directly related to the quality of the samples provided, any kind of test carried out on such coatings, appearance characteristics or physical characteristics (such as color, hiding power, gloss, drying time, etc.). When testing, the samples need to be uniform and comparable, with precise thickness control, and the applicator is the tool that provides this uniform coating effect.

Application

SZQ-300/400/500/700 single-sided Wet Film Applicator is suitable for coating, ink, powder, pigment and other industries.

Pictures

Coating applicator x1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.