CHINA Thickness Wheel Thickness Gauge Wet Film Wheel WTW-500 Thickness Gauge 0~500μm

Introduction

Wet film wheel is a device that measures the wet film thickness of coatings. It is often used for quality control of coating processes such as coatings, paints, and glues. It is usually a graduated roller used to measure the thickness of a wet coating, that is, a coating that has been applied to a surface but has not yet dried.

The WTW-500 wheel gauge Thickness Gauge has a measuring range of 0~500μm, a graduation value of 25μm, a diameter of 50mm, and is made of 9Cr18Mo wear-resistant stainless steel.

Principle

The principle of the wet film wheel is based on physical measurement. It measures the thickness of the wet coating by gently rolling a scaled roller on the surface of the wet coating, and then reading the value on the scale. Since different coatings and applications may require different thicknesses, the scale of the wet film wheel can be calibrated to specific coating properties and requirements.

Features

• Smooth and burr-free, with polished surface.
  

• Made of 9Cr18Mo high carbon chromium stainless steel, it has good corrosion resistance, high hardness and good wear resistance.

• The operation of the wet film wheel is relatively simple and does not require complex equipment or skills.

• It can instantly measure the thickness of the coating while it is wet, helping to detect coating problems early.

• Wet film wheels are a powerful tool for quality control, ensuring coating thickness meets design requirements.

• It is widely used in the coating industry and is suitable for different types of coatings and coating processes.

Wet Film Wheel x1, Test Report X1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.