DUBAN DB25-204G Grain feed pellet durometer

Applications

DB25-204G series grain feed pellet Hardness Tester is a newly developed digital display hardness testing instrument, specially designed for grain feed pellets. This Hardness Tester has significant advantages such as high accuracy, easy operation and portability.

Science recommends limiting the measurement range when testing to between 10% and 100% of full scale, while metrology departments recommend not testing with a range below 1% of full scale. In addition, after installing the instrument and placing the object to be measured, before starting the test, please press the ZERO key to clear it to eliminate the influence of the weight of the fixture.

Features

This DB25-204G series grain feed pellet Hardness Tester has the following features:

• High-precision and high-resolution measurements.

• Digital display eliminates reading errors.

• Four different measurement units are provided: N (Newton), kg (kilogram), lb (pound), and g (gram), which can be switched and converted to each other as needed.

• Supports peak hold function, which can maintain peak value display until manually cleared.

• It has a green environmental protection mode that can automatically shut down the device if it is not operated for about 10 minutes; it can also be shut down manually.

• It can be powered by alkaline batteries and also supports 5V DC power supply, which is convenient for use in different occasions.

The whole machine X1, measurement bracket X1, screw X4, instruction manual X1X1, brush X1, cross screw driver X1,

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.