LANDTEK HT6510B Shore Durometer for on-site Hardness measurement of finished rubber and plastic products
Measurement unit HA/HB/HC/HD/HE/HDO/HO/HOO.
LANDTEK
HT6510B
-
Defelsko PosiTector SHDD1 D Shore Durometer
$ 1128.00 -
TQC LD0551 Shore durometer type D, Dial-Type portable Shore durometer
$ 951.00 -
Digital microporous material Hardness Gauge HS-C Haibao C type digital microporous material Hardness Gauge
$ 385.00 -
AMITTARI AMS-1 Shaw A measurement bench
$ 242.00 -
LANDTEK HT6510OO Shore Durometer Sponge, Foam Rubber, Silicone, Gel Materials
$ 276.00
Features
Comply with the following standards: "Rubber Pocket Hardness Tester Indentation Hardness Test Method" GB/T 531-1999; "Plastic Shore Hardness Test Method" GB/T 2411-80; DIN 53505; ISO 868; ISO 7619; ASTMD 2240; JISK7215 .
Average calculation function.
**Value latch function.
Under Voltage alarm indication function.
Use "USB data line output" and "RS-232 data line output" to communicate with PC.
Provides Bluetooth data output selection.
Series model
| model | stylus | Measurable materials | hardness value |
| A | 0.79 truncated cone | Soft plastics, rubber, synthetic rubber, felt, leather, printing rollers | 20~90A |
| B | R 0.1 taper | Medium hard rubber materials and typewriter rollers, etc. | Greater than 90 A, less than 20 D |
| C | 0.79 truncated cone | Plastic and intermediate hard rubber materials | Greater than 90 B, less than 20 D |
| D | R 0.1 taper | Fiber plastics, hard rubber, hard plastic materials, organic glass, stiff thermoplastics, bakelite, printing rollers, vinyl sheets, cellulose acetate, etc. | Greater than 90 A |
| DO | R 1.2 hemispherical | Plastic medium hard to hard rubber material | Greater than 90 C, less than 20 D |
| O | R 1.2 hemispherical | Soft elastic materials, printing rollers, textile fabrics, cotton, acrylic, rayon, belon | Less than 20 DO |
| OO | R 1.2 hemispherical | Sponge, foam rubber, silicone, gel materials | Less than 20 O |
| E | R 2.5 hemispherical | Hard sponge, EVA | Greater than 90 DO, less than 20 D |
LANDTEK HT6510B Shore Shore DurometerSpecifications
| LIST | VALUE |
|---|---|
| Crimping head size | R0.1 cone |
| Application | Moderate hard rubber, thermal plasticity plastics, thermal plasticity resilience, paper products, fiber materials |
| Hardness value | Greater than 90A, less than 20D |
| Accuracy | ≤±1H |
| Display parameters | Hardness value/average value/** value |
| Measurement unit | HA/HB/HC/HD/HE/HDO/HO/HOO |
| Display range | 0HA ~100 HA（HB/HC/HD/HE/HDO/HOO/HMF/HF） |
| Measurement range | 10HA~90 HA（HB/HC/HD/HE/HDO/HOO/HMF/HF） |
| Resolution | 0.1H |
| Low Voltage prompt | √ |
| Automatic shutdown function | √ |
| Operating Environment | Temperature: 0~50 ℃; Humidity:~ 80% RH |
| Power | 4 AA batteries |
| Dimensions | 162mm*65mm*28mm |
| Weight | 170G (without battery) |
LANDTEK HT6510B Shore Shore Durometer Packing list
host X1, manual X1, certificate X1, warranty card X1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
FAQ
- CM-8822 Landtek Coating Thickness Gauge
- Comparison table of each model of LANDTEK Thickness Gauge [Selection Guide]
- IncomingGB/T 39693.2-2025
- ActiveASTM -2022
- ActiveJJF 2075-2023
- ActiveJJF 2074-2023
- ActiveKS MISO 868-2001
- ActiveGB/T 603-2023
- ActiveGB/T 18173.3-2014
- AbolishGB/T 531-1999