MODERNER Frame 25/50/75/100 Large Frame 4-sided Coating Applicator film width 80mm

Introduction

MODERNER large frame type four-sided coater, model frame type 25/50/75/100, coating width is 80mm, and there are four coating thicknesses of 25μm, 50μm, 75μm and 100μm. The material of the large frame four-sided applicator is stainless steel, which has good corrosion resistance.

Parameter comparison

Material and hardness value

The frame type 25/50/75/100 large frame type four-sided applicator is made of 9Cr18Mo stainless steel, which has good wear resistance and corrosion resistance. The hardness of the Applicator reaches HRC48±2.

Applications

Frame type 25/50/75/100 large frame type four-sided applicator is used to coat wet film with specified thickness to measure the hiding power, color and luster of the sample or to prepare samples, etc.

Steps for usage

1. Put the template on the platform and fix it so that the Frame Applicator does not move when it slides over.

2. Select the preparation of the appropriate wet film thickness, and place it on the short side of the sample, close to parallel or at a specified position.

3. Pour about 5 ml of the sample in front of the frame-type 25/50/75/100 large frame-type four-sided applicator, press the two ends of the preparer with your fingers, and slide at a constant speed of 150 mm/s, and finally get Wet film at desired wet film thickness.

4. After use, the frame-type four-sided applicator should be wiped clean with a suitable solvent, and the surface should be coated with oil or Vaseline.

Pictures

Applicator x1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.