MODERNER Frame 25/50/75/100 Small Frame Film Applicator Groove Width 58mm

Overview of Frame Wet Film Preparator

MODERNERal frame-type Wet Film Applicator, model 25/50/75/100, is a four-sided Wet Film Applicator with a groove width of 58mm. The wet film thickness prepared by the frame-type 25/50/75/100 is 25μm , 50μm, 75μm, 100μm. The frame-type Wet Film Applicator is suitable for film production and proofing in coating and ink laboratories to measure coating film properties.

Parameter comparison

Material and hardness value

The frame-type 25/50/75/100 small Frame Applicator is made of 9Cr18Mo stainless steel, which has good wear resistance and corrosion resistance. The hardness of the preparer reaches HRC48±2.

Steps

1) Place the sample on the platform and fix it, ensuring that the frame-type 25/50/75/100 small-Frame Applicator cannot move when it slides over.

2) According to the experimental requirements, select a small Frame Applicator with appropriate wet film thickness and place it on the short side of the sample, close to parallel or at a specified position.

3) Pour about 5 ml of sample in front of the 25/50/75/100 small frame Applicator.

4) Press both ends of the preparer with your fingers and slide it at a constant speed of 150 ml/second to obtain a wet film of the required thickness.

5) After use, the preparer should be cleaned immediately with a suitable solvent and coated with oil or petroleum jelly.

Product actual pictures

Applicator x1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.