Swirl/spin Wear Measurement Instrument NBC-Taber5612 Wear resistance Tester
In line with DIN-53754, ASTM-D3884 standard, 250g, 500g, 1000g three kinds of load, counter electronic display 6 digits, automatic stop, swirl/spin Rotation speed 60, 70 rpm.
Factory
NBC-Taber5612
-
HUITAO HT-1079 Wire and cable scratch Tester, touch screen scratch Tester
$ 4377.00 -
HUITAO CSI-457 steel wool friction testing machine, non-conductive film wear test
$ 1268.00 -
HUITAO HT-1090 Ceramic Unglazed Brick Wear Resistance Tester, Unglazed Brick Wear Resistance Depth Tester
$ 2628.00 -
JINGKELIAN JM-VI abrasion instrument, wood wear performance test
$ 1563.00 -
CHINA NBC-500g weight rubber alcohol Wear testing machine accessories 500g
$ 89.00
Introduction
The Taber wear-resistant testing machine uses a standard cutter to cut the test piece, uses a specified type of grinding wheel, and loads a certain weight to wear it. After reaching the specified number of revolutions, take out the test piece and observe the condition of the test piece after grinding or before the test. The difference between the weight and the weight after the test. Wear index calculation formula: Wear loss weight/number of test revolutions à 1000 Grinding wheel number for selection: H18
Applications
Suitable for wear resistance testing of fabrics, plywood, floor tiles, glass, natural rubber and other materials . Comply with DIN-53754, ASTM-D3884 and other standards.
Factory NBC-Taber5612 Taber Wear resistance TesterSpecifications
| LIST | VALUE |
|---|---|
| test piece | Outer diameter 100mm, inner diameter 8mm, thickness 3mm |
| load | 250g,500g,1000g |
| Counter | Electronic display 6 digits, automatic shutdown |
| Rotation speed of test disc | 60,70 rpm or as specified |
| Machine size | 320*480*310mm |
| Machine Weight | About 18kg |
| Accessories | 1 piece of test piece cutter, 1 piece of wrench, 1 set of abrasive wheels, 1 pack of yarn paper |
| Coating abrasive wheels | CS17 |
| plywood | CS32 CS33 |
| cloth | H18 H22，CS17 |
| plastic | CS17, H18, H22 (abrasive wheels are optional) |
| Power supply Voltage | AC220V 50HZ |
| abrasive wheels | Abrasive wheels Standard H-18 Miscellaneous abrasive wheels need to be purchased separately |
Factory NBC-Taber5612 Taber Wear resistance Tester Packing list
Host X1, load weight 250gX1 pair, load weight 750gX1 pair, sample clamp ring X1 set, power cord X1, abrasion wheel H-18X1 pair, new sandpaper X1 piece, hexagonal wrench X1 set, toolbox X1, manual X1, vacuum cleaner X1 set
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
FAQ
- Determination of leather colour fastness by swirl/spin friction Tester
- Briefly introduce the working principle, application and selection precautions of rubber Wear testing machine
- Basic Principle and Application Analysis of Asphalt Wear testing machine
- Introduction to common wear resistance test methods
- Paint film adhesion and test method thereof
- Principle, Application and Selection of Adhesive Tape Wear testing machine
- Talking about the performance test of epoxy resin film coated on PET
- Introduction of varnish detection method and application
- ActiveASTM G195
- ActiveASTM D813-2007
- ActiveGB/T 43818.1-2024
- ActiveJC/T 2570-2020
- ActiveGB/T 4893.8-2023
- ActiveGB/T 13448-2019
- ActiveISO 10074-2021
- ReplacedGMW 4205
- ActiveASTM D5264-2019
- AbolishGB/T 13448-2006