MODERNER Frame 30/60/90/120 Small Frame Applicator 58mm Groove Width

Introduction to Frame Preparators

The groove width of the MODERNER frame 30/60/90/120 small Frame Applicator is 58mm, and the coating film thickness is 30μm, 60μm, 90μm, 120μm. The small Frame Applicator is a four-sided wet film of corrosion-resistant stainless steel. Preparator with four grooves.

Parameter comparison

Materials used and hardness values

Frame type 30/60/90/120 small frame type preparer is made of 9Cr18Mo stainless steel, which has good wear resistance and corrosion resistance. The hardness of the small Frame Applicator reaches HRC48±2.

How to operate

1) Place the sample on the platform and fix it, ensuring that the frame-type 30/60/90/120 small-frame Applicator cannot move when it slides over.

2) According to the experimental requirements, select a small Frame Applicator with appropriate wet film thickness and place it on the short side of the sample, close to parallel or at a specified position.

3) Pour about 5 ml of sample in front of the 30/60/90/120 small frame Applicator.

4) Press both ends of the preparer with your fingers and slide it at a constant speed of 150 ml/second to obtain a wet film of the required thickness.

5) After use, the preparer should be cleaned immediately with a suitable solvent and coated with oil or petroleum jelly.

Product actual pictures

Applicator x1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.