CHINA NBC-7200 midsole fiber folding Tester
Using DC motor, the NBC-7200 has a zigzag angle of 90 ° and a zigzag speed of 60r/min.
Factory
NBC-7200
-
CHINA NBC-7201 Heel Bending Tester
$ 2640.00 -
CHINA NBC-5647 flexible circuit board FPC flexural testing machine
$ 1711.00 -
JINGWEN JW107C2 paper MIT folding resistance Tester
$ 1350.00 -
CHINA BLD-103 ROSS tortuous testing machine
$ 1568.00 -
CHINA BLD-139A Finished shoes tortuous testing machine
$ 1911.00
Introduction
Used to test the bending resistance quality of midsole fiberboards of leather shoes, casual shoes, walking shoes and travel shoes.
Test principle
The sample is continuously bent 90 degrees to the left and right until it breaks. The bending resistance index of the midsole is determined based on the number of times it breaks. This is used as a basis for comparison and selection of the midsole . Sampling requirements: Cut a standard sample with a length of 80mm and a width of 10mm from the finished fiberboard. Result judgment: The number of times of fracture is used to determine the bending resistance index of the midsole.
Factory NBC-7200 Midsole fiber folding TesterSpecifications
| LIST | VALUE |
|---|---|
| Specimen size | 80x10mm |
| Counter | LCD, 0~999999 |
| upper fixture | Six. |
| motor | DC motor |
| Lower clamp and Weight | 2 +/- 0.1kg, 6 pcs |
| Volume | 1000x370x350mm |
| folding angle | Left and right 90 ° |
| Weight | About 100kg |
| folding speed | 60r/min |
| Power | 1∮，AC220V，5A |
Factory NBC-7200 Midsole fiber folding Tester Packing list
machine X1, manual X1, certificate X1, warranty card X1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
FAQ
- Folding Tester - paper folding performance test
- Paper and Cardboard - Determination of folding strength