Search
    Cart(0)
      总价
      前往结算
      您的购物车是空的 : )
      Home> Abrasion Tester> Factory> Factory NBC-101-6Z Wear testing machine
      Factory NBC-101-6Z Wear testing machine

      CHINA NBC-101-6Z Martindale friction testing machine, six stations

      The microcomputer system adopts two counting methods, which are intuitive and generous, easy to set, six stations are tested simultaneously, and have automatic technical functions.

      Brand
      SKU: NB044603
      China Factory
      Stock
      Loading…
      Price
      $ 2176.00
      Promotion
      Service
        Service
        The delivery and service By NBchao.Com
        VS
        Genuinegoods
        • Factory NBC-101-6Z Wear testing machineOverview

        • Specifications
        • Comments
        • FAQs
        NBC-101-6Z
        Wear testing machine
        • CHINA NBC-101-6Z Martindale friction testing machine, six stations
        The microcomputer system adopts two counting methods, which are intuitive and generous, easy to set, six stations are tested simultaneously, and have automatic technical functions.

        Introduction

        The Martindale friction Tester is a device used to test the friction resistance of materials. This testing machine is commonly used to evaluate the wear resistance of different materials, including textiles, leather, rubber, coatings, plastics, and more. Friction resistance testing is important for quality control and performance evaluation of materials because it simulates the wear and tear that a material may experience in daily use.

        Martindale friction testing machines typically include the following major components and features:

        • Friction head: A component used to apply friction and come into contact with the material being tested.

        • Rotating platform: A platform that supports the material being tested and can rotate or move on a flat surface to simulate friction between the material and other surfaces.

        • Load Cell: Controls the load or pressure exerted on the friction head to simulate stresses under actual usage conditions.

        • Control system: used to control the operation of the testing machine, including parameters such as applied friction force, test time and speed.

        • Data recording and analysis system: used to record data during testing, such as friction force, friction coefficient and friction resistance performance indicators, and conduct subsequent data analysis.

        Features

        This instrument is designed by absorbing the advantages of similar instruments at home and abroad. It has a beautiful appearance and is easy to operate. The microcomputer system adopts two counting methods, which is intuitive and generous, and is easy to set. Eight stations can be tested at the same time to improve test efficiency.

        The instrument also has two Lissajous 24mmx24mm and 60.5mmx60.5mm motion trajectories and a variety of supporting accessories, which can adapt to a variety of test method standards.

        Standards compliant

        Tests on the pilling degree of fabrics such as GB/T4802.2, ASTM D4970, ISO12945-2, etc.

        GB/T13775, ASTM D4966, ISO12947 and other fabric wear resistance tests.


        VS

        Factory NBC-101-6Z Wear testing machineSpecifications

        LIST VALUE
        station number 6 groups
        expected count 0~999999 times
        Cumulative count 0~999999 times
        Clothing sample Weight 395g
        Stainless steel butterfly sheet 260g
        Husband holder 200g
        Furniture decoration sample Weight 594g
        Maximum run 24±0.5mm、 60.5±0.5mm
        Effective friction diameter of grinding block A type 200g (1.96N) friction head 28.8-0.084mm; B type 155g (1.52N) friction head 90- 0.10mm
        Relative moving speed of gripper and mill 50-2R/min loading
        Bell Mass 2385±10g
        Weight 100kg
        consumables 4 sheets of wool felt and 4 sheets of test cotton cloth.
        Power Ac220V 50H2

        Factory NBC-101-6Z Wear testing machine Packing list

        host X1, manual X1, warranty card X1, certificate X1

        [Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.

        FAQ

        [Q]
        Our lab needs to do pilling tests for leather and Spinning & weaving products. Which equipment should I choose?
        [A]
        NBC-101-6Z Martindale testing machine can. It supports two standard motion trajectories (24mm and 60.5mm), equipped with a special friction head and load system, which can meet GB/T4802.2, ASTM D4970 and other pilling test standards. One machine is multi-purpose, especially suitable for Quality inspection organizations and fabric production enterprises.
        [Q]
        Why can this instrument be used for multiple material tests simultaneously?
        [A]
        Because it designs adjustable load units and multi-specification friction heads, such as A-type 200g and B-type 155g friction heads, with different masses of pressure hammers (such as 395g, 594g), it can accurately simulate the friction conditions of different scenes such as furniture decoration and clothing. Plus the microcomputer system presets a variety of counting modes, flexible operation and reliable data.
        Factory
        CHINA NBC-101-6Z Martindale friction testing machine, six stations
        Service
        Focus on online sales of Lab Testing Instruments