CHINA NBC-5625 wire swing testing machine, cable repeated bending Detector

Introduction

This machine is specially designed to test the flexural strength of plug leads and cables. The test method is to fix the sample on the fixture, add a certain load, and swing the fixture left and right. After a certain number of times, check its disconnection rate, or when it cannot be powered on, check the total number of swings. This machine can automatically count and test. When the material is bent to the point where the wire is broken and power cannot be supplied, it can automatically stop working.

This testing machine complies with the provisions of "General Safety Requirements for Flexible Cord Components and Power Cords" in relevant standards such as UL817. It is suitable for relevant manufacturers and quality inspection departments to conduct bending tests on power cords and DC cords.

This machine is specially designed to test the flexural strength and speed of plug leads and cables. It adopts a photoelectric sensor to collect signals and transmits them to a digital display meter. The value can be read by directly adjusting the stepless speed regulator.

Test method: The test method is to fix the sample on the fixture, add a certain load, and swing the fixture left and right. After a certain number of times, check its disconnection rate, or when it cannot be powered on, check its total number of counts, and it can start automatically. stop working.

host X1, manual X1, warranty card X1, certificate X1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.