CHINA NBC-5632 MIT type folding Tester Paper Folding Endurance Tester
Test load 4.91N, 9.81N, 14.72N; bending angle 135 ° +/- 2 °; sample size 15mm wide, about 250mm long, specially test the bending strength of paper and Cardboard
Factory
NBC-5632
-
JINGWEN JW107C2 paper MIT folding resistance Tester
$ 1350.00 -
CHINA NBC-FOLD600 vertical low temperature folding Tester temperature range -30 ℃ + 100 ℃
$ 5889.00 -
PUYUN PY-H608 MIT type folding resistance Tester paper folding resistance Tester
$ 2088.00 -
CHINA ZY-NZ1 folding resistance instrument
$ 1594.00 -
CHINA BLD-139A Finished shoes tortuous testing machine
$ 1911.00
Introduction
This machine is specially designed to test the folding strength of paper and cardboard. The test method is to fix both ends of the test piece on the machine, apply the required load on the lower clamp to make the test piece bear a certain tension, and hold the lower clamp toward the test piece in a vertical state. Bend the sample back and forth on the left and right sides, with a bending angle of 135 degrees, until the sample is broken, and counting is performed automatically.
Factory NBC-5632 MIT type refractory TesterSpecifications
| LIST | VALUE |
|---|---|
| test load | 4.91N，9.81N，14.72N |
| Bending angle | 135°±2° |
| Specimen size | Width 15mm, length about 250mm (for reference) |
| Width of upper chuck | 19±1mm |
| Arc radius of the fold | 0.38±0.02mm |
| The distance between the cracks of the folding head | max1.0mm |
| Counter | 0~9999 times |
| exterior size | (W*D*H)330*365*460mm |
| Control mode | Touch screen operation |
| Weight | About 30kg |
| Power | AC220V |
Factory NBC-5632 MIT type refractory Tester Packing list
machine X1, manual X1, certificate X1, warranty card X1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
FAQ
- Folding Tester - paper folding performance test
- Paper and Cardboard - Determination of folding strength