CHINA NBC-FOLD600 vertical low temperature folding Tester temperature range -30 ℃ + 100 ℃
Inner and outer box material stainless steel #304, temperature range -30 ℃ + 100 ℃, with protection device thermal protection shutdown, leakage protection shutdown, over-temperature protection, overload protection and other functions.
Factory
NBC-FOLD600
-
HUITAO HT-F817 Finished sole folding testing machine, national standard shoe bending testing machine
$ 7875.00 -
CHINA NBC-7125 12 sets of leather folding testing machine
$ 1061.00 -
CHINA NBC-7201 Heel Bending Tester
$ 2640.00 -
CHINA NBC-5632 MIT type folding Tester Paper Folding Endurance Tester
$ 1409.00 -
CHINA ZY-NZ-1 Folding Tester Cardboard Folding Tester
$ 1563.00
Introduction
The shoe material low-temperature flexural testing machine is a device used to evaluate the bending performance of shoe materials in low-temperature environments. Its principle is based on simulating the use of shoes under real low-temperature conditions. By bending the shoe materials in a low-temperature environment, it tests its durability and flexibility under cold conditions. The adjustable bending angle and frequency, as well as real-time monitoring and recording of shoe material changes, provide reliable data support for the design and manufacturing of footwear products.
This machine is used to test the cold resistance of finished shoes, rubber, plastic, soles, synthetic leather, etc. to understand the adaptability of materials or finished products to low-temperature climates or cold areas. This machine is made of stainless steel and can be equipped with various resistant fixtures. Different requirements apply.
Main features
Low-temperature environment simulation: The testing machine simulates the use of shoe materials in cold conditions, such as in winter or extremely cold areas, by controlling the low-temperature environment.
Folding mode: The testing machine can fold shoe material samples, simulate the bending deformation of shoe materials under low temperature conditions, and test its folding performance and flexural resistance.
Control system: The testing machine is equipped with a control system that can accurately control the temperature and test parameters to ensure the accuracy and repeatability of the test.
Data recording and analysis: The testing machine is equipped with a data recording and analysis system, which can monitor the test process in real time, process and analyze the test data, and obtain test results.
According to the standard
ASTM-D1790, D1593,1052, JIS-K6545, HB-T2877, CNS-7705, ISO 20344, GB/T20991-2007
Factory NBC-FOLD600 Vertical low temperature folding TesterSpecifications
| LIST | VALUE |
|---|---|
| Inner & Outer Chamber Material | Stainless steel #304 |
| Temperature range | -30℃+100℃ |
| Optional inner box action | Installed finished shoes are resistant to bending, outsole is resistant to twisting, and leather is flexible and fixture. |
| Protection device | Thermal protection shutdown, leakage protection shutdown over temperature protection, overload protection and other functions |
| Control Accuracy | ±0.3℃ |
| Temperature Uniformity | ±2℃ |
| Cooling rate | It takes about 45 minutes to reach -30 ℃ at room temperature |
| Refrigerant | R404 Environmental Refrigerant |
| Compressor | Original fully enclosed |
| Compressor start delay | 5min |
| Power consumption | (4-6)KW |
| Thermal Insulation | Hard Foam & Glass Cotton |
| Counter | LCD,0~999,999 |
| window | (210 × 35 × 270) mm, two-grid vacuum layer |
| Window light | P1, 5W |
| Power | AC380V 50Hzor1 AC220V 50HZ |
| motor | Belt-less multi-imported gear reduction motor |
| Weight | 420kg |
Factory NBC-FOLD600 Vertical low temperature folding Tester Packing list
machine x1, manual x1, certificate x1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
FAQ
- Paper and Cardboard - Determination of folding strength
- Folding Tester - paper folding performance test