PUSHEN SYW-I residue on sieve Tester 45 μm sieve aperture
70R/min Rotation speed with 45 μm sieve pore size, suitable for the determination of powder particles dispersed or insoluble in water, in line with many international standards.
Pushen
SYW-I
-
Huicheng HCDR-S thermal conductivity Tester, high-low temperature thermal resistance performance test
$ 5083.00 -
SMART SENSOR AR6818 Cable Tester
$ 212.00 -
QIWEI WS70-1 Infrared Drying Oven rapid drying equipment
$ 154.00 -
SMART SENSOR AR944M Underground Metal Detector LED Light/Sound Prompt
$ 137.00 -
Jinan HORIZON F-35 Backpressure High Temperature Cooking Instrument
$ 2920.00
Introduction
SYW-I sieve residue measuring machine is a new product that adopts foreign new technology. This product is suitable for pigments and extender pigments dispersed in water. It is also suitable for other powders or particles that are insoluble in water, but it is not suitable for water that is difficult to wet or is difficult to wet. Pigments and extender pigments granulated into balls are currently the best testing equipment for laboratory personnel.
Standards compliant
| GB/T | 5211.14-2021 |
| ASTM | D 5895 |
Pushen SYW-I Residue on sieve MeterSpecifications
| LIST | VALUE |
|---|---|
| Motor parameters | 60W 220V 0.5A 50HZ |
| Rotation speed | 70 r/min |
| Sieve aperture | 45μm |
| exterior size | 830×460×1580mm |
| Weight | 78kg |
Pushen SYW-I Residue on sieve Meter Packing list
host X1, manual X1, certificate X1, warranty card X1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
FAQ
- Combined pencil Hardness Tester operating instructions
- Shanghai Pushen pushen film preparation instrument selection table [selection]
- Pushen KTQ Micrometer Film Applicator
- A good manual Ink Proofer from domestic (CN)