Haibao HJJ-08 fixture
Hypertherm HJJ-08 push-pull test bench fixture has a maximum load of 1000N, which is suitable for tensile, destructive, and insertion force testing of rubber, various cables, packing tapes, and various electrical components.
HBO
HJJ-08
-
Sandu SJ-038 Pneumatic Fixture 0.5KN
$ 355.00 -
Digital Force Gauge Hypertherm HG-10 Portable Force Gauge 10N/0.005N
$ 239.00 -
SUNDOO SJ-012 flkn fixture 2kN
$ 133.00 -
Spring tensile and compression testing machine HT-30P Hypertherm spring tensile torture testing machine with printer
$ 727.00 -
SUNDOO SJ-003 Jaw Clamp 0.5kN
$ 99.00
Introduction
HJJ series push-pull dynamometer fixtures are produced by Haibao and are specially used for supporting push-pull dynamometer test benches. When the push-pull dynamometer is assembled on the test stand for tensile testing, it is often necessary to use fixtures to assist in the test. Different types of push-pull dynamometer fixtures are suitable. The range is different. The conventional HJJ series push-pull gauge clamps have fifteen different models (HJJ-01~ HJJ-15 ), which are suitable for different fields such as tapes, leather, clothing, rubber, electrical components, and paper.
Pictures
HBO HJJ-08 fixtureSpecifications
| LIST | VALUE |
|---|---|
| Measured value | 1000N |
| Scope of application | Rubber, various cables, packing tape, various electrical components and other materials tensile force, destructive force, insertion force test. |
HBO HJJ-08 fixture Packing list
Fixture x1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.