HANNA HI98130 acidity meter multiparameter pH-EC-TDS Measurement Instrument
Acidity pH: 0.00 to 14.00 pH, EC: 0.00 to 20.00 mS/cm, TDS: 0.00 to 10.00ppt (g/L) pH, EC, TDS quick switching automatic identification calibrate, widely used in education, scientific research, environmental protection, water treatment, agriculture, gardens, soil, etc.
HANNA
HI98130
HI98193
-
TONGAO TR 6900CNHN Benchtop STIP-scan detection of COD/ammonia nitrogen/Total nitrogen
$ 3935.00 -
HANNA BL121-20 Water Quality Measurement Controller
$ 1936.00 -
LEICI DGB-428 Portable multiparameter Water Quality Analyzer Total Phosphorus
$ 521.00 -
BANTE S20 Wireless Bluetooth ORP Meter
$ 221.00 -
QIWEI ZYL portable residual chlorine meter residual chlorine concentration detection
$ 203.00
Introduction
HI98130 multi-parameter pH-EC-TDS measuring instrument adopts a new appearance design, a large two-line screen display, on-screen calibration operation step prompts, a humanized operation interface, stable indication marks, two-button simple operation, and convenient operation. Simultaneous display of measurement parameters and temperature measurement, quick switching of pH, EC, and TDS, automatic identification and calibration, built-in calibration point, automatic temperature compensation, BEPS low-power error-proofing system is suitable for laboratory-level or outdoor environment measurements, and is widely used in education, scientific research, Environmental protection, water treatment, agriculture, gardening, soil, etc.
Characteristics
One instrument, three sensors;
Waterproof design, if accidentally mixed into the sample, it will float on the surface;
Automatic temperature compensation;
Stabilizes readings and locks readings on the display so measurements can be recorded;
Low battery reminder, if there is insufficient power, the instrument will automatically shut down;
Auto-off function automatically turns off after 8 minutes of non-use to extend battery life.
HANNA HI98130 Acidity MeterSpecifications
| LIST | VALUE |
|---|---|
| Measurement range -pH | 0.00-14.00 pH |
| Resolution-pH | 0.01 pH |
| Accuracy -pH | ±0.05 pH |
| EC range conductivity | 0.00-20.00 mS/cm |
| Resolution -EC conductivity | 0.01mS/cm |
| TDS range | 0.00-10.00g/L(ppt) |
| Resolution-TDS | 0.01 ppt(g/L) |
| Accuracy - TDS | ±2% F.S. |
| Temperature Measurement Range | 0.0-60℃/32.0-140.0°F |
| temperature resolution | 0.1℃/0.1°F |
| Temperature Accuracy | ±0.50℃/10°F |
| pH calibrating mode | 1-2 points automatically identify calibrate, built-in calibrate point: pH4.01/7.01/10.01 |
| EC conductivity /TDS calibrate | Automatic identification of single point calibrating, EC calibrating point: 1413μS/cm; TDS calibrating point: 1382mg/L |
| pH electrode | HI73127 replaceable, EC/TDS electrode and temperature transducer are not replaceable |
| Battery | 4X1.5V button battery, can be used continuously for 100 hours, in measurement mode, it will automatically shut down if it is not used within 8 minutes. |
| size | 163×40×26mm/100g |
HANNA HI98130 Acidity Meter Packing list
machine X1, manual X1, certificate X1, warranty card X1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.