HANNA HI1043B Laboratory pH electrode (strong acid/base)

Introduction

HI1043B strong acid/alkali laboratory pH electrode is suitable for measurement of strong acid, strong alkali, paint, seawater and other samples in conventional laboratories.

When using a new electrode, remove the top protective cover first and inspect the entire electrode. If it is found that the electrolyte inside the electrode evaporates through the dialysis membrane and salt crystals are formed in the electrode head and protective cover, this does not affect the normal use of the electrode, indicating that the electrode dialysis membrane is normal, just rinse it away with clean water. During transportation, bubbles may be generated in the glass ball of the electrode head. In this case, the bubbles can be removed by gently shaking the electrode like a common mercury thermometer. If the electrode glass sensing membrane or dialysis membrane head is relatively dry, soak the electrode in HI70300 electrode storage solution for at least 1 hour to keep the dry glass sensing membrane and dialysis membrane moist; regular soaking is good for the electrode .

Application

Routine laboratory samples of strong acid, strong alkali, paint, seawater , etc.

machine X1, manual X1, certificate X1, warranty card X1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.