UK RK KHC.01.S short coating rod Drawdown Plate set, choose 8 models from 0 to 9 wire rods

RK short wire rod set contains the following products

RK short wire rod set short wire rod model selection refer to the table below

Please select any 8 wire rod numbers from the following

How to use RK short wire rod set

1. First prepare a substrate of appropriate size for proofing.

RK company can provide two types of proofing paper for proofing (500 sheets per package, half of the proofing paper is coated with varnish, and the other half is without varnish) RK model list

■ For small imprinting beds, the specification is 12×21cm

■ For large imprinting beds, the specification is 18×31cm

2. Place the substrate on the imprinting bed and clamp it with clamps.

3. Select a suitable type of short squeegee rod (please refer to relevant information) and place it on the imprinting bed, close to the clamp.

4. Place the paint or varnish used for proofing near the clamp, about 1cm below the ink filament stick. (Please control the dosage yourself)

5. Hold both ends of the short squeegee rod with both hands, and pull the ink wire rod toward the operator at a constant speed and pressure. Please be careful not to rotate the wire rod during the operation.

6. After proofing, clean the short wire rods in a suitable solvent and wipe them dry with a cloth. Please note that the wire rod should always be kept dry 

Application fields of RK short wire rod set

Short wire rods are used in research, testing and quality control in the testing of inks, coatings, adhesives and various emulsions. Applicable substrates for RK wire rods include paper, cardboard, plastic film, metal foil, etc.

The functions of each product in RK short wire rod set

	K Hand Coater short line rod: Provides a simple and effective coating method that can be used to apply coatings to a variety of substrates, including paper, cardboard, plastic film, foil, metal plates, glass plates, wooden boards, etc. Two or more coatings can be applied simultaneously in one operation, making it an ideal instrument for making comparison samples.
	RK imprinting bed: Used with the RK imprinting bed, compared to proofing directly on hard substrates, proofing on the RK imprinting bed has better repeatability and proofing effects. This is because the soft imprinting bed can absorb the pressure exerted by the operator on proofing to a certain extent, thus making the proofing effect better.
	RK imprinting bed: Used with the RK imprinting bed, compared to proofing directly on hard substrates, proofing on the RK imprinting bed has better repeatability and proofing effects. This is because the soft imprinting bed can absorb the pressure exerted by the operator on proofing to a certain extent, thus making the proofing effect better.

Main rod [with glue head] X8, Drawdown Plate x1, proofing paper x500, bracket x1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.