MODERNER XB-25 Wire bar WFT 25μm

Introduction to XB-25 wire rod

MODERNER XB-25 wire bar is a wire-wound wire bar applicator used in laboratories to prepare coating films of specific thickness. The XB-25 wire bar coating film thickness is 25 microns and the coating width is 200mm. XB-25 wire rod is made of stainless steel and has good corrosion resistance. It can be used with a handle (sold separately) to make coating easier and more effective.

Specifications

Note: XB wire rod applicator needs to purchase an additional handle

Instructions

First, place the sample on the platform and fix it to ensure that the sample cannot move when the XB coating scraper passes over it.

Second, select the appropriate XB coating scraper according to the required wet film thickness and place it at the position specified on the sample.

Third, pour an appropriate sample in front of the xb coating scraper, hold the handle (need to be purchased separately) with your hand, and slide it at a constant speed of 150 mm/second, that is, apply a wet film with the required thickness.

Note: The XB coating scraper must be washed and dried with an appropriate solvent immediately after use to prevent the paint from drying out after too long and making it difficult to clean, causing blockage and affecting subsequent experiments.

Product actual pictures

Optional

Main Rod X1, External Encasement Pipe X1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.