HANNA HI96785 Honey chroma Tester
Measurement range 0 to 150 mm Pfund, resolution 1 mm Pfund, Measurement accuracy +/- 2 mm Pfund@80 mm Pfund, direct Colorimetry measurement.
HANNA-
TONGAO TR-708H Wastewater chroma analyzer
$ 786.00 -
QSG Colorimeter YONGLIDA varnishes, oil and thinner Color
$ 145.00 -
HANNA HI96785 Honey chroma Tester
$ 689.00 -
JINGKELIAN QSG format tube
$ 114.00 -
JINGKELIAN QSG Iron and Cobalt Tintometer for the determination of varnishes, oils and thinners Color basis GB/T 1722-92
$ 131.00
Introduction
Honey in nature presents a variety of tones, from light yellow to amber yellow, from deep amber yellow to black red. This different unprocessed color mainly comes from the color diversity of the plants collected by bees, so it can be commercially The different colors of honey determine the plant origin of the honey. In addition, the color of honey will gradually darken with storage time or storage methods, such as using old honey, contact with metal, improper storage temperature, exposure to sunlight, etc. Honey color grade is usually compared with glycerol standard sample and measured in Pfund (mm).
HI96785 Honey Colorimeter [Bufant] Tester is an instrument used to measure the color depth of honey. The color of honey is often related to the different types of pollen and other substances it contains. The color of honey can range from pale yellow to dark brown, and sometimes even appears reddish or green. The color of honey is not only its appearance, but also reflects its taste, taste and nutritional content. It is widely used during honey production and quality control to ensure that the color of honey meets relevant standards and consumer expectations.
Features
Auto Off - When the meter is in measurement mode, it automatically turns off after 10 minutes of non-use. Prevent battery waste if the meter is accidentally turned on.
Battery status light - Indicates remaining battery life.
Error Messages - Messages on the display alert to problems, including no cap, high zero, and low standard.
Cooling Lamp Indicator - To maintain the proper wavelength for absorbance, ensure that the assembly does not overheat due to the heat generated by the tungsten lamp. Each photometer is designed to allow a short period of time for the components to cool down. The cooling light indicator is displayed before a reading is taken.
HANNA HI96785 Honey chroma [buffant] TesterSpecifications
| LIST | VALUE |
|---|---|
| Measurement range | 0 to 150 mm Pfund |
| resolution | 1 mm Pfund |
| Measurement Accuracy | ±2 mm Pfund@80 mm Pfund |
| Light source | Tungsten lamp |
| light Detector | Silicon Photocells, photovoltaic cells, Narrowband Interference filters @420nm and 525nm |
| method | Direct measurement |
| Operating Environment | 0~50 ℃; RH ≤ 95% non-condensing |
| Dimension | 192*104*69mm |
HANNA HI96785 Honey chroma [buffant] Tester Packing list
machine X1, manual X1, certificate X1, warranty card X1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
![HANNA HI96785 Honey chroma [buffant] Tester](http://img.nbchao.com/imgs/800/2024/08/14/1347460868795224.jpg)

HI96785






