HANNA HI76409A/P special PTFE dissolved oxygen film set
Made of durable ABS plastic with a high density polyethylene (PE) (HDPE) oxygen permeable membrane, each lid is easily filled with electrolysis and mounted on the probe, the membrane separates the probe cathode and anode from the tested water.
HANNA
HI76409A/P
-
Qiwei Y-615 Portable Ozone Analyzer
$ 256.00 -
TONGAO TR-308H COD Ammonia Nitrogen Total Phosphorus Turbidity Tester Water Quality Analyzer
$ 3172.00 -
TONGAO TR-102H Portable Cyanide Tester 0-1mg/L
$ 792.00 -
HANNA HI9829-10042 high-precision multiparameter Water Quality Analyzer GPS pH/ORP/EC/DO 4m probe 230V
$ 7051.00 -
LEICI DGB-403F Portable residual chlorine/total chlorine/chlorine dioxide Tester
$ 616.00
Introduction
HI76409A/P is a replacement dissolved oxygen screw cap membrane designed for Hanna portable electroplated dissolved oxygen probes and sensors. The cap is made of durable ABS plastic with a high-density polyethylene (HDPE) oxygen-permeable membrane. Each cap is easily filled with electrolyte and installed on the probe. Membranes separate the probe cathode and anode from the water being measured. Oxygen diffuses across the membrane and interacts with the current system, producing an electric current proportional to the oxygen concentration. Each cap is easily filled with HI7042 electrolyte and screwed onto the probe.
HANNA HI76409A/P Special PTFE dissolved oxygen film setSpecifications
| LIST | VALUE |
|---|---|
| note | quantity |
HANNA HI76409A/P Special PTFE dissolved oxygen film set Packing list
machine X1, manual X1, certificate X1, warranty card X1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.