CHINA NBC-DJ5-1500 Automatic Film Applicator 2 meters oven
With unwinding + scraping + 2 meters drying + overlaying + winding functions, the effective application width is 100~1500mm, the drying temperature range is -200 ℃, and the discharging and receiving sizes are 1500mm respectively.
Factory
NBC-DJ5-1500
NBC-DJ11-1000
NBC-DJ7-800
-
Rgd-00/400cs hot-melt adhesive coating and cutting machine, Coil Automatic Film Applicator
$ 35826.00 -
Oven coil composite coater with unwinding + scraping + drying + covering + winding function
$ 26187.00 -
Taigang TG-RR300 laboratory roll-to-roll small coater small hot-melt adhesive coater
$ 5978.00 -
Factory direct P-rgd/350 coil Blade Coating head coater head, servo control application width 350mm
$ 7222.00 -
Pilot-scale coil automatic film laminating machine, with unwinding + scraping + drying + film laminating + deviation correction + winding function application width 750mm
$ 23389.00
product structure
The machine consists of a machine body, a gluing width adjustment device, a feeding rack, a gluing roller set, a thickness adjustment dial indicator, a transmission platform, a traction roller set, and a transmission mechanism.
Structure and composition
Body: The body of the equipment is entirely composed of aluminum alloy + high electrostatic spraying plate.
Glue width adjustment device: The width adjustment device is composed of food-grade plastic and adjustable brackets.
Unloading rack: The machine is equipped with two unloading racks. When the alignment of the two materials deviates during the lamination process, the deviation correction device automatically adjusts to move the rack left and right to achieve the effect of aligning the two materials.
Glue coating roller set: The glue coating roller set is made of precision machined parts with double rollers and has smooth transmission.
Thickness adjustment dial indicator: Adjust the required coating thickness when applying glue. Rotate the left and right hand wheels on the rubber coating roller frame clockwise or counterclockwise to adjust the thickness of the glue coating. The specific thickness is determined according to the dial indicator.
Transmission platform: The transmission platform is made of stainless steel. Its main function is to smoothly transmit the base material after gluing to the next process.
Traction roller group: Pull the base material between the upper and lower rollers of the traction roller by hand. Tighten the hand wheel on the frame to make the traction roller and the rubber ring of the upper roller contact the lower roller. The traction roller group pulls the base material through power transmission. Come over and get the coating done.
Factory NBC-DJ5-1500 Automatic Film ApplicatorSpecifications
| LIST | VALUE |
|---|---|
| Spreader process | Roll → Scratch → Drying → Roll |
| Effective Spreader Width | Max.Φ1500mm |
| Coating Method | scraping |
| Cutting head type | Adjustable drawdown blade |
| Indication display | digital display |
| WFT | 0.005-3mm |
| Regulator Graduation | 0.001mm |
| Spreader Accuracy | ±10% |
| Coating Speed | 1-10M/min (adjustable) |
| unwinding method | Inflatable shaft unwinding |
| winding method | Inflatable shaft winding |
| Outer diameter of winding air expansion shaft | 3-Inch expansion shaft, load-bearing 50KG |
| maximum discharge | Max.Φ1500mm |
| Maximum charge | Max.Φ1500mm |
| Drying temperature range | RT+~200℃ |
| Temperature control Accuracy | ±5℃ |
| Heating method | hot air circulation |
| Oven length | 1M/section |
| Total length of drying tunnel | 12m |
| Drying power | 1KW/section |
| Tension control range | 1~10N |
| Tension control Accuracy | ±0.5N |
| Motor type | Servo motor |
| control mode | PLC + touch screen |
| Human Machine Interface | Color touch screen |
| tension control | automatic |
| Deviation Correction control mode | automatic |
| Film thickness control | manual |
| Fitting method | Roll fit |
| Fitting speed | 0.1~ 10M/min (adjustable) |
| fit width | Max.Φ1500mm |
| gas source | 0.5~ 0.8MPa compressed air |
| Applicable coil type | Plastic film, metal foil, paper, non-woven fabric, etc |
| Spreader type | Water-based paints, solar-based paints, UV coatings, etc |
| Operating environment temperature | 10℃ ~ 40℃ |
| Operating Environment humidity | 30～90%RH |
| Power Supply | 380V, 50Hz, three-phase five-wire system |
| Total power | 45KW (subject to actual customization) |
| Dimensions | About 4000mm*2000mm*1600mm (subject to actual customization) |
| total | Subject to actual customization |
| Tension control mode | Automatic constant tension |
Factory NBC-DJ5-1500 Automatic Film Applicator Packing list
Machine x1, Manual x1, Encasement List x1, Certificate of Conformity x1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
FAQ
- Deep analysis of tension control principle of coater coil
- Application of Automatic Film Applicator on BOPP Thin
- Overview of Roll-to-Roll Film Applicator Technology
- Overview and comparative analysis of roll-to-roll coater and double-sided coater technology
- Overview of waterproofing membrane plaster coater technology
- Application and Technological Innovation of Coater Scratching Hot-melt Adhesive on PET Film
- Technical Research and Practice of Application Case of Coil Coater in Butyl Rubber Spreader
- Automatic Film Applicator technology analysis
- Fiberglass hot-melt adhesive coater technical analysis and operation guide
- Self-adhesive coil coater technology principle, operation and maintenance