CHINA NBC-XF500 pet slot die roll to roll Film Applicator Spreader Width 500mm
Spreader width 500mm, slot-die extrusion Spreader, used for coating liquid materials on flat coils such as PET, support winding and unwinding, film laminating, heating drying, automatic correction heating temperature room temperature -160 degrees.
Brand
SKU: NB045796
FactoryModel
NBC-XF500
Rxf-01/350 pro
Price
$ 59144.00
Promotion
Service
The delivery and service By NBchao.Com
VS
What else did others buy
-
CHINA NBC-6026D hydrogel coater application width 480mm
Login -
UV UV curing coil coating machine Rxg-01/600uv automatic film laminating machine
$ 20280.00 -
HuiNuo JTM-300UV/0.6 Small continuous coater UV UV curing Full electric control 0.01mm Spreader thickness
$ 9398.00 -
CHINA NBC-DJ11-1000 small oven coil coater 1m oven
$ 28053.00 -
Chinese Rgd-02/300cl pilot coil Automatic Film Applicator correction film laminating machine
$ 38935.00
Genuinegoods
NBC-XF500
Slot die Film Applicator
Spreader width 500mm, slot-die extrusion Spreader, used for coating liquid materials on flat coils such as PET, support winding and unwinding, film laminating, heating drying, automatic correction heating temperature room temperature -160 degrees.
Function description
This coating machine coats liquid materials on flat rolls such as PET, and then solidifies them in a drying box to form a finished new material.
Equipment process flow
Coating the base material roll (tension control) â â peeling off the base material protective film â â slurry slit coating (automatic glue supply) â â lamination (optional) â â heating and drying â â lamination â â automatic correction ââRewind
VS
Factory NBC-XF500 Slot die Film ApplicatorSpecifications
| LIST | VALUE |
|---|---|
| Coating method | Slot-die |
| Coating size | Max.500mm |
| Spreader thickness range | 10-250 microns |
| Film type | PET flat coil |
| Equipment speed | 1-20 m/min (only ensure that the tension and air Volume of the equipment are thermostatic and stable when producing the substrate, and the actual production speed is determined by the customer according to the glue formula and production process factors) |
| mechanical speed | Max. 20 m/min |
| Power | 380 volts x 50 Hz x 3 phase (380伏x 50赫兹x3相) |
| Electric heating Total installed Power | It is tentatively estimated that the peak value is 40KW (the specific installed Power is subject to the formal design) |
| Recommended plant demand size | Length: 15 meters, width: 3 meters, height: 3 meters (you can choose above the 2nd floor) |
| First coil discharge diameter | Max. Ø600 mm |
| Second finished product winding diameter | Max. Ø 600 mm |
| Air-rising shaft clamping mode | Bearing and gear drive on the shaft |
| Gas shaft specification | Standard core roll 3 inches |
| Rewinding and unwinding station | 4 stations for front discharge (2 stations + 2 collection) 2 stations for rear winding part (1 station + 1 collection) |
| rewinding load | 100KG |
| Edge correction method | Oven outlet with automatic deviation correction |
| Spreader Accuracy | Dry-Film Accuracy +/- 3 microns |
| Oven support | Cylinder (automatic lift) |
| heat source | Electric heating (stainless steel wing heating tube) |
| Number of ovens | 4 sections (2 meters section, the Total length of the drying tunnel is 8 meters) |
| Oven structure | 304 stainless steel (asbestos insulation) |
| In-oven fan | Adjustable wind speed 100-1400 rpm (Mechanical Rotation speed) |
| Oven opening method | Automatic lifting of unilateral and bilateral cylinders |
| Drying method | tiled |
| Glue supply method | quantitative glue supply |
| Glue container | Sealing type (with cover) |
| Glue container | 30 liters |
| tension control | Automatic constant tension |
| Exhaust system | Exhaust motor 300W 650 cubic meters/h (adjustable speed) |
| Disbonding device | Front section 2 disbonding station (magnetic particle tension disbonding) |
| Pre-film laminating | Before drying film laminating device (upper roller + lower steel rod) |
| Film laminating pressure regulation | Gap dial adjustment/air pressure adjustment (double adjustment) |
| Film laminating | Pneumatic |
| Post film laminating | Automatic film laminating (rubber roller + steel rod) air pressure adjustable/discharge tension control |
| Control system | PLC control (10-inch touch screen) |
| Material break detection | automatic detection |
| Drive motor | Inverter motor/servo motor |
| Oven cleaning | Efficiently filtrate |
| Waste heat recovery | Energy-saving waste heat recovery system (about 30% energy saving) |
Factory NBC-XF500 Slot die Film Applicator Packing list
machine x1, manual x1, certificate x1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
FAQ
[Q]
Is the price listed on the website the final cost for overseas purchases?
[A]
No, it isn't. This is the ex-factory price of the product in the Chinese Mainland. In addition to this price, buyers from different countries need to account for additional costs such as shipping fees, tariffs, and others. For specific regional quotes, please consult our customer service or fill out a quotation form.
[Q]
What is the specific process for purchasing the product?
[A]
First, please click on the quotation form on the website and fill in detailed information. Our customer service personnel will then send you a quotation based on your specific country and region, confirming payment and delivery methods. Following this, we proceed with contract signing, payment, and shipment. You can then await delivery.
[Q]
What should I do if the instrument I purchase needs repair?
[A]
After-sales repair for overseas instruments is an unavoidable issue. Our repair terms stipulate that the sender is responsible for the shipping and insurance costs incurred for the repair. Repairs within the warranty period are free, while repair costs beyond the warranty period are determined based on the actual situation.
+Factory NBC-XF500 Slot die Film Applicator Big data
+Factory NBC-XF500 Slot die Film ApplicatorKnowledge
- Research and Application of Waterproof Membrane Lab Film Applicator
- Analysis of extrusion hot-melt adhesive coater technology and comparative study of coil hot-melt adhesive coater
- Polymer coil coater vs sheet coater: technology showdown
- Comparison between hot-melt adhesive double-sided coater and hot-melt adhesive coil coater
- Mechanical Properties of Coated coil coatings
- In-depth analysis of small coil coater technology and selection points
- Adhesive Application Case of Coil Coater and Spreader Technology Introduction
- Comparison and Difference Between Offset Press and Film Applicator
- Epoxy coil coater technology and selection method
- Technical Principle, Application and Selection of PT Film Roll-to-Roll Film Applicator
+Factory NBC-XF500 Slot die Film ApplicatorStandard
+Navigation