| Coating method | Wire bar scraping + automatic lame plating |
| Coating size | 500*600mm |
| Coating speed | 5~ 180Mm/s (< 5mm/s can be customized) |
| Vacuum Area | 500 * 600Mm (can be customized) |
| Vacuum aperture | Φ0.7mm |
| Vacuum hole spacing | 10*10mm |
| Vacuum pump size | 380*180*280mm |
| speed control | Infinitely variable speed |
| Coating table material | aluminum alloy |
| Spreader Accuracy | ±3μm |
| Heating Temperature range | RT+~200℃ |
| Temperature Uniformity | ±3℃ |
| Customizable function | Automatic inking system |
| Feeding principle | Air source pressure flows out |
| Feed Sport Mode | Reciprocating linear motion |
| Feeding back and forth traverse speed | 2-150mm/s |
| spit Volume | Adjustable (by adjusting the air pressure and the operating speed of the discharge port) |
| Shaft drive mode | Timer belt |
| Feeding system air source | 0.6Mpa, can be connected to the trachea of φ 8 (self-matching) |
| Power Voltage of feeding system | 220V,50Hz |
| Tank pressure | Maximum withstand 8Mpa |
| Material of feeding barrel | 304 stainless steel with a wall thickness of 4mm |
| Feeding drum configuration | Safety valve, pressure regulating valve, pressure gauge, relief valve |
| Optional | Leakage tank, substrate fixing fixture, trimming horizontal height support foot device, Glass plate, Silicone pad and Weight (for applications with uneven thickness of Spreader substrate), application width control baffle |
| Feeding drum Volume | 1L |
Warranty days: 365 days