UK RK KHC.02.S Long coating rod Drawdown Plate set, choose 8 models from 0 to 9 wire rods

RK long wire rod set contains the following products

Long wire rod model technical parameters

The functions of each product in RK short wire rod set

	K Hand Coater short line rod: Provides a simple and effective coating method that can be used to apply coatings to a variety of substrates, including paper, cardboard, plastic film, foil, metal plates, glass plates, wooden boards, etc. Two or more coatings can be applied simultaneously in one operation, making it an ideal instrument for making comparison samples.
	RK imprinting bed: Used with the RK imprinting bed, compared to proofing directly on hard substrates, proofing on the RK imprinting bed has better repeatability and proofing effects. This is because the soft imprinting bed can absorb the pressure exerted by the operator on proofing to a certain extent, thus making the proofing effect better.
	Washing rack

Application fields of RK long wire rod set

Long wire rods are used for research, testing and quality control in the testing of inks, coatings, adhesives and various emulsions. Applicable substrates for RK wire rods include paper, cardboard, plastic film, metal foil, etc.

Coating and proofing operation method

1. First prepare a substrate of appropriate size for proofing.
RK company can provide two kinds of proofing paper for proofing (500 sheets per package, half of the proofing paper is coated with varnish, and the other half is without varnish)
■ For small printing beds, the specification is 12×21cm
■ For large imprinting beds, the specification is 18×31cm
2. Place the substrate on the imprinting bed and clamp it with clamps.
3. Select a suitable type of short squeegee rod (please refer to relevant information) and place it on the imprinting bed, close to the clamp.
4. Place the paint or varnish used for proofing near the clamp, about 1cm below the ink filament stick. (Please control the dosage yourself)
5. After proofing, put the long wire rod into a suitable solvent, clean it, and wipe it dry with a cloth. Please note that the wire rod should always be kept dry 

Main rod [with glue head] X8, Drawdown Plate x1, proofing paper x500, bracket x1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.