Chengyue CY-USP130-A Ultrasonic pyrolysis lame plating machine, ultrasonic spray pyrolysis equipment 40KHz 130W
Equipped with 40KHz 130W ultrasonic Nebulizer and PID temperature control heating substrate, it supports 1-50mPa · s liquid viscosity, and the nozzle travel is up to 190mm, which is suitable for precise control of solution output and fog particle size.
ChengYue
CY-USP130-A
-
Chengyue CY-SP-04-HT high throughput ultrasonic pyrolysis lame plating machine, battery electrode perovskite film prepative
$ 49817.00 -
PUSHEN PS 2950 150 * 70 * 5mm high density fiber cement board 300pcs/box
$ 207.00 -
CHANGLONG SW-60 (yellow) temperature indicator tablet, rated temperature 60 ℃
$ 83.00 -
CHANGLONG SW-70 (green) temperature indicator tablet, rated temperature 70 ℃
$ 83.00 -
PUSHEN PS 2953 430 * 150 * 5mm high density fiber cement board 50pcs/box
$ 156.00
Introduction
In the spray pyrolysis film method, the solution is atomized and sprayed onto a heated base, and then the desired material structure is obtained on the substrate. CY-USP130-A Ultrasonic Pyrolysis Spraying Machine is an ultrasonic spray pyrolysis equipment, which is equipped with a 40KHz 130W ultrasonic atomizer, a PID temperature-controlled heating substrate substrate, a high-precision peristaltic pump and a precision-programmed stepper motor moving mechanism. Through the integrated design, this equipment can accurately control the solution volume, spray speed and fog particle size and other parameters, and the substrate temperature can also be controlled, which can meet your various test needs.
This material preparation method is particularly suitable for depositing oxides and has a long history in the preparation of transparent electrodes.
Scope of application
It is widely used in the preparation of perovskite solar cells.
ChengYue CY-USP130-A Ultrasonic pyrolysis lame plating machineSpecifications
| LIST | VALUE |
|---|---|
| supply Voltage | AC220V,50Hz |
| Max Power | 3.5KW (including compressor + peristaltic pump about 1.5KW) |
| Ultrasonic Nebulizer | 40KHz 130W |
| liquid viscosity | 1-50mPa·s(cP) |
| Nozzle stroke | X-Y-Z axis Max 190mm |
| Traverse speed | 10-180mm/min (x-axis direction) 10-180mm/min (Y-axis direction) |
| Heating substrate substrate | 150mm×150mm |
| Max temperature | 500℃ |
| Temperature control mode | AI-PID temperature control |
| Drip coating tank Capacity | 50mL/250mL (with two large and small jars) |
| Peristaltic pump liquid separation rate | 0.006-41mL/min |
| Control method | Industrial control computer + instrument panel |
| Machine size | 850×850×1450mm |
ChengYue CY-USP130-A Ultrasonic pyrolysis lame plating machine Packing list
host X1, manual X1, certificate X1, warranty card X1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.