Chengyue CY-VPS500-3GN vacuum pyrolysis lame plating machine, three nozzles, vacuum pyrolysis system
Equipped with three nozzles synergy system and vacuum system, support 5000Pa basic vacuum degree and 500 ℃ high temperature control, high-precision peristaltic pump and stepper motor moving mechanism to achieve multi-layer film preparatory.
ChengYue
CY -VPS500-3GN
-
PUSHEN PS 2951 200 * 150 * 5mm high density fiber cement board 100pcs/box
$ 164.00 -
PUSHEN PS 2953 430 * 150 * 5mm high density fiber cement board 50pcs/box
$ 156.00 -
CHANGLONG DG-2 (500g) electrical contact conductive paste, suitable for electrical connectors/switch touchpoint parts 220 ℃
$ 131.00 -
Chengyue CY-SP-04-HT high throughput ultrasonic pyrolysis lame plating machine, battery electrode perovskite film prepative
$ 49817.00 -
PUSHEN PS 2950 150 * 70 * 5mm high density fiber cement board 300pcs/box
$ 207.00
Introduction
The spray pyrolysis method is to atomize the solution and spray it onto the heated base, and then obtain the desired material structure on the substrate. CY-VPS500-3GN Vacuum Pyrolysis Spraying Machine adds a multi-nozzle coordination system and a vacuum system on the basis of ordinary pyrolysis spraying, it is equipped with three high-pressure gas-driven atomizing nozzles and a matching anti-drip baffle, which can work together through the touch screen to make multi-layer films. The vacuum system is capable of providing a basic vacuum of 5000Pa, which can be spray pyrolysis in a protective gas environment after being filled with inert gas. In addition, this instrument also has a high-precision peristaltic pump and a precision-programmed stepper motor moving mechanism, and the substrate temperature can also be controlled, which can meet your various test needs.
Scope of application
It is widely used in the preparation of perovskite solar cells.
ChengYue CY -VPS500-3GN Vacuum pyrolysis lame plating machineSpecifications
| LIST | VALUE |
|---|---|
| supply Voltage | AC220V,50Hz |
| maximum temperature | 500℃ |
| Spray booth | 690×690×790mm |
| Temperature control mode | Al-PID temperature control |
| Atomization head | High Voltage air atomization nozzle X3 Each nozzle is equipped with a high Voltage gas drive baffle to prevent dripping |
| pressure regulator | Adjustable compressed air intake |
| Maximum Power | 3.5KW (including compressor + peristaltic pump about 1.5KW) |
| liquid viscosity | 1-50mPa·s(cP) |
| Nozzle stroke | X-Y axis up to 180mm |
| Traverse speed | 0-250Mm/s (x-axis direction) 0-250mm/s (Y-axis direction) |
| Heating substrate substrate | 200×200mm |
| Drip coating tank Capacity | 50mL/250mL/50mL (with three jars, one large, two small) |
| Peristaltic pump liquid separation rate | 0.006-41mL/min |
| Vacuum pump | Two-stage rotary vane vacuum pump |
| vacuum gauge | Mechanical vacuum gauge |
| Ultimate Vacuum | ≤5000Pa |
| Control method | Industrial control computer + instrument panel |
| Machine size | 900×900×1750mm |
ChengYue CY -VPS500-3GN Vacuum pyrolysis lame plating machine Packing list
host X1, manual X1, certificate X1, warranty card X1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.