TQC CX2030 Probe Connector CX2030 Clamp Workpiece Surface Thermocouple
TQC sheen
CX2030
-
TQC CX2030 Probe Connector CX2030 Clamp Workpiece Surface Thermocouple
$ 431.00 -
LeiEn LN-40K Furnace temperature tracker 4 channels -100-1300 ℃ Measurement range USB charging
$ 1159.00 -
Rennes LN-60K Furnace temperature tracker 6 channels 400 ℃ 1 hour
$ 1454.00 -
Rennes LN-60K aluminum brazing special Furnace temperature tracker 6 channels 700 ℃ 1 hour
$ 4113.00 -
Rennes LN-60K Semiconductor curing Furnace temperature tracker 6 channels 200 ℃ 1 hour
$ 2216.00
Probe parameters
| Model： | CX2020 clip-on air probe | CX2030 Clamp-on Workpiece Surface Thermocouple |
| Probe cable length cm: | 150 | 150 |
| Probe Wire Type: | Teflon | Teflon |
| Measurement Purpose: | air | The surface of the workpiece |
| Probe Type: | Clip-on | Clip-on |
| Maximum Temperature: | 300℃/570℉ | 300℃/570℉ |
Types of temperature probes
All Curve-X2 probes are specifically designed to guarantee accurate readings:
The probe is in good contact with the working surface.
Lightweight and good shape to avoid affecting the temperature.
Easy-to-clean Teflon sheath, flexible and strong metal wire.
Probe leads
Standard probes are supplied with a specific probe line, and the Teflon wire surface is easy to clean.
Surface probe |  |
Air probes |  |
Other probe types
Magnetic surface probes
The probe is attached to the workpiece by strong magnetism, has a small size and light weight, and the sensor is thermally insulated with a magnet to ensure that the measured temperature is not affected. This probe is particularly suitable for round workpiece surfaces, such as metal tubes and car bodies.
Annular surface probes
Universal probe with aluminum ring with fast temperature response at the jaw end.
Open contact probe
The universal probe can be used to measure air or workpiece surface temperatures, and it is an exposed thermocouple that can be fixed with adhesive tape or other machinery.
 |  |  |
| Magnetic surface probes CX2050 | Annular surface probes CX2065 | Open contact probe CX2063 |
The temperature logger is equipped with a probe channel identification label
List of probe types
| Ordering number | Probe line length cm | Probe line type | Measurement use | Probe type | Maximum temperature |
| CX2020/21/22 | 150/300/500 | Teflon | air | Clip-on | 300℃/570℉ |
| CX2069/68 | 150/300 | Teflon | air | magnetism | 300℃/570℉ |
| CX2030/40/41 | 150/300/500 | Teflon | The surface of the workpiece | Clip-on | 300℃/570℉ |
| CX2050/60/62 | 150/300/500 | Teflon | The surface of the workpiece | magnetism | 300℃/570℉ |
| CX2065/66/72 | 150/300/500 | Teflon | general | Ring 6mm | 300℃/570℉ |
| CX2063/64/67 | 150/300/500 | Teflon | general | Open contacts | 300℃/570℉ |
| CX2055/56 | 150/300 | SS braided wire | The surface of the workpiece | magnetism | 480℃/900℉ |
| CX2048/49 | 150/300 | SS braided wire | The surface of the workpiece | Clip-on | 480℃/900℉ |
| CX2085/86 | 150/300 | SS braided wire | general | Ring 6mm | 480℃/900℉ |
| CX2023/24 | 150/300 | SS braided wire | air | Clip-on | 480℃/900℉ |
| CX2090/91/92 | 150/300/500 | Inconel | general | Ring 6mm | 1000℃/1830℉ |
Choose the right length probe for your needs
Take you to the Dutch TQC
TQC sheen CX2030 Probe cableSpecifications
| LIST | VALUE |
|---|---|
| Model | CX2030 Clamp Workpiece Surface Thermocouple |
| Probe line length | 150cm |
| Probe line type | Teflon |
| Measurement purposes | workpiece surface |
| Probe type | clip type |
| maximum temperature | 300℃/570℉ |
TQC sheen CX2030 Probe cable Packing list
Probe x1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.