German arcotest 28 #corona pen Dyne pen Surface Tension Test Pen
Adopting fiber wear-resistant tip, not easy to deform, fluent ink output, smooth writing, wear-resistant tip design, tight cap, to ensure long service life and Stability.
ARCOTEST
28#
60#
58#
56#
54#
52#
50#
48#
46#
44#
42#
40#
38#
36#
34#
32#
30#
26#
24#
22#
-
UK PILLAR sherman 51 Dyne pen Corona pen, cleanliness
$ 100.00 -
CUIYUAN CY 62 Dyne pen Corona pen Surface Tension Test Pen
$ 84.00 -
Fengzhiyue 39 Dyne pen surface tension coefficient 39
$ 83.00 -
CUIYUAN CY 27 Dyne pen Corona pen Surface Tension Test Pen
$ 84.00 -
American Aisha A. shine No. 61 Dyne pen Corona pen
$ 96.00
Introduction
The arcotest 28# dyne pen is a professional testing tool that can accurately test dynes on films, metals, PCBs, plastics, ceramics and other materials.The fiber wear-resistant nib is not easy to deform, the ink is smooth, the writing is smooth, the wear-resistant nib design, and the cap is tightened to ensure a long service life and stability.The pen body is designed with a large capacity of 15ML, which can meet the needs of a variety of industries, and can accurately reach the ±0.5 of the factor.There are 38 Dyne models and 28-70 models to meet the various testing needs of different users.
Features
Accurate test: Accurately test the energy value and surface cleanliness of the substrate surface to reach the value of the pen body.
Long service life: wear-resistant design to ensure a long service life.
Sealed pen cap: Prevent the volatilization of pen and ink and maintain the stability of pen and ink.
Wide range of use: suitable for pre-treatment of a variety of materials to meet the needs of different industries.
Long shelf life: storage at 20-25 degrees, 40-60% RH environment is the best, long shelf life.
International SGS certification: the quality is internationally recognized, safe and reliable.
How to use the dyne pen
When testing with an Arcotest dyne pen, draw a line on the surface by placing the pen perpendicular to the surface of the object to be measured, applying appropriate pressure. Different models of dyne pens require different pressures. Depending on the situation in which the line is drawn, different results can be analyzed.
Analyze the results
Based on the situation of line drawing, the following conclusions can be drawn:
If the lines are evenly distributed and there are no beads, the surface dyne is higher than or equal to the index marked by the Tester.
If the line shrinks slowly, the surface dyne is below the index marked by the test pen.
If the line immediately shrinks and forms a bead, the surface dyne is very below the index marked by the test pen.
ARCOTEST 28# Dyne penSpecifications
| LIST | VALUE |
|---|---|
| pen | Fiber flat head |
| size | Length: 138mm; pen diameter: 16mm |
| width | 5mm |
| Encasement | 15Ml pen pack |
| time | Pay attention to observe within 4 seconds |
| Color | Red, blue optional |
ARCOTEST 28# Dyne pen Packing list
Dyne pen X1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.