RDS 4 #1/2 "Steel Wire Drawdown Rod film thickness 9.1μm Wire diameter 0.36mm

Color inspection of liquid inks?

If you are referring to scraping liquid inks and standard inks samples by Wire-wound drawdown bar to compare Color, use this.

Do you support customization? Such as wet film thickness and length?

Spreader rod length and main rod diameter support customization, but wet film thickness RDS has provided dozens of specifications covering more than 200 microns, and in principle does not accept customization.

Applicator rod conforms to GB/T13217.7 standard?

Applicator rod is suitable for GB/T13217.7, please consult customer service for detailed application definition

Can this coating rod be prepative of multi-layer ultra-thin film?

The wire rod can be prepared for 1.5 micron ultra-thin film. Everyone must know it, but another advantage of it is multi-layer film, which is much better than I-shaped film applicator. But multi-layer film tests the flatness of the previous layers of film drying. Generally, the film thickness (such as less than 10 microns/layer) is too thin to control. The wire rod with Film Applicator is a very good solution, eliminating the problem of uneven pressure and speed of hand scraping.

Adhesive coating, any suggestions?

The preparation of Adhesive coating is applicable to the Mayer-Rod principle, and Mayer Rods coating can be used. The thickness of the prepared Adhesive coating can be controlled by itself. In general, Adhesive can be properly diluted (such as ethyl acetate), and then coated on BOPP film or Miscellaneous substrate.