RDS 6 #1/2 "steel wire scraping rod, rod Applicator film thickness 13.7μm Wire diameter 0.15mm
Also known as the color rod, using winding process, Wire diameter 0.15mm, rod diameter 12.7mm, the main rod and steel wire are stainless steel, can film 13.7μm.
Brand
SKU: NB004635
RDS
6# 1/2"
6# 3/8"
Price
$ 179.00
Promotion
Service
The delivery and service By NBchao.Com
VS
What else did others buy
Genuinegoods
6# 1/2"
Applicator rod 1/2 "
Also known as the color rod, using winding process, Wire diameter 0.15mm, rod diameter 12.7mm, the main rod and steel wire are stainless steel, can film 13.7μm.
VS
RDS 6# 1/2" Applicator rod 1/2 "Specifications
| LIST | VALUE |
|---|---|
| Production process | Wire-wound |
| WFT | 13.7µm |
| diameter | 12.7mm |
| Total length | 400mm |
| Application width | 300mm |
| Grip width | 50+50mm |
| material | stainless steel |
| Wire diameter | 0.15mm |
RDS 6# 1/2" Applicator rod 1/2 " Packing list
Stainless Steel Rod X1 Transparent Encasement Hose X1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
FAQ
[Q]
Do you support customization? Such as wet film thickness and length?
[A]
Spreader rod length and main rod diameter support customization, but wet film thickness RDS has provided dozens of specifications covering more than 200 microns, and in principle does not accept customization.
[Q]
Meet GB/T13217.1 Applicator rod
[A]
6 #1/2 "Applicator rod, please refer to it.
[Q]
Our company is a solar backplane, the laboratory needs to use a scraper, want to consult, want to achieve the film thickness in our mind, how to choose the rod number, no thickness of dry film can not refer to ah, before using the rds6 scraper, coated with a thickness of dry film is 4 microns, if I want to reach 6 to 8 microns, can you suggest?
[A]
It can be roughly calculated according to dry film = wet film × solid parts. The wet film of RDS No. 6 rod is 13.7 μm, and the solid content is about 29% by calculation. If you want to make 6 μm and 8 μm dry films, you need to scrape the wet film 20.5 microns and 27.4 microns, which corresponds to RDS rod, which can be close to RDS 9 #and RDS 12. Thank you for your consultation.
+RDS 6# 1/2" Applicator rod 1/2 " Big data
+RDS 6# 1/2" Applicator rod 1/2 "Similar products
+RDS 6# 1/2" Applicator rod 1/2 "Knowledge
- RDS Mayer Rods preparatory passivating film
- One article introduces RDS Applicator rod type and FAQ
- The experimental case of OSP Mayer Rods at inks Moulding [with video]
- Laboratory small coater film video demonstration on Aluminum Panel
- Application of laboratory coater on release paper with glue [video demonstration]
- What problems should I pay attention to when buying a wire rod applicator?
- Frequently Asked Questions for Inventory 2022 Lines, Issue 1
- Mayer Rods VS Film Applicators
- Experimental film coating machine case | Scrape coating slurry on release film
- Pull wire test
+RDS 6# 1/2" Applicator rod 1/2 "Standard
- ActiveGB/T 1727-2021
- ActiveGB/T 7044-2022
- ActiveHG/T 5370-2018
- ActiveHG/T 3951-2007
- ActiveGB/T 13217.1-2020
- ActiveHG/T 3948-2007
- ActiveGB/T 21867.3-2008
- AbolishGB/T 13217.1-2009
- ActiveASTM D823-2018
+Navigation