TQC No. 2 Ford Ford Viscosity Cup ASTM2 Viscosity Cup 2.53mm

Introduction to the aluminum alloy Ford Cup

The TQC Ford Cup is the most widely used measurement tool in the field of viscosity testing coatings for rapid viscosity testing of fluids that conform to or close to Newtonian mechanical properties, and the outFlow Cup method is also recognized worldwide as a fast and effective method for measuring viscosity.

Today's paint Ford cups are produced according to a number of international standards that have been around for many years and specify not only the precise dimensional tolerances required in the process, but also their use and the data records obtained.

Each TQC brand paint Ford cup is produced under an ongoing quality control program and is engraved with a unique serial number. Most Ford cups are made of aluminum-titanium alloy and stainless steel. All filters embedded in the bottom of the Ford cup are made of stainless steel.

FORD Viscosity Cups are used to test the concentration of paints, paints and other similar products. The viscosity of the liquid is calculated and classified by the process of the liquid flowing out of the hole under the Ford cup.

Parameters

Ford Cup features

1. Paint Ford Viscosity Cup design, there is a deep groove on the cup mouth to prevent the measured liquid from overflowing

2. All kinds of special paint Ford cup holders

3. TQC coating Ford Cup is made through strict quality monitoring procedures

4. Each cup is engraved with a unique number code

5. Each paint Ford cup is packed in a thick plastic box with a soft material stuffed inside to protect the cup.

Options:

1.VF2067 TM1 Temperature Regulator for DIN and ASTM standard cups

2.VF1980 S20 special bracket designed in 2005

3.VF2062 S10 Round Bracket

4.VF2061 S40B tripod, rust steel ring, level

5. VF1982 DIN standard temperature regulator and ASTM standard S20 special bracket are available

6. VF2053 Viscosity Conversion Disc

7. D10076 C510 banknote LCD digital display, 9 hours, 59 minutes, 59.99 minutes

8. VF2034 certificate, M type, cup type FB10, according to ASTM D 1200 standard

Product detail drawing

Ford cup bracket type

TQC Model Selection

Take you to the Dutch TQC

Viscosity cup x1, Encasement box x1, Manual x1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.