TQC VF2098 Specific Gravity Cup Aluminum Alloy Material 50ml

Introduction

The TQC Bibi Cup is available in four models: VF2097, VF2098, VF2099 and VF2100, which are used to determine the specific gravity of coatings and other similar substances, and are suitable for the density of uninflated specimens.

How-to animation video

Parameters

Features

1. The upper lid has a small hole that slopes to the center of the top, so that excess sample material can spill out without bubbles, which can increase accuracy

2. There are 50ml, 100ml, stainless steel, aluminum and other models to choose from

3. Garden pillar type, large opening, suitable for plastic density test and paint ink coating specific gravity detection

4. All models are supplied with a calibration certificate;

Procedure

1. Weigh the clean and dry density cup and record it

2. Keep the density cup and the liquid being tested within a specific temperature range (20°C + -0.5°C;68°F + -1.0°F)

3. Pour the liquid into the gravity cup

4. Close the lid smoothly

5. Avoid air bubbles

6. Carefully wipe the spilled liquid clean with an absorbent cloth.

7. Weigh the weight of a filled gravity cup

8. Calculate density: density = (weight g of full cup - weight g of empty cup) / volume of specific gravity cup ml

Actual picture of the product

Take you to the Dutch TQC

Specific Gravity Cup x1, calibrated certificate x1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.