HUINUO CP3000-D inks Stirrer 30L/1.5KW
The capacity of the barrel is 30L, the stirring speed is 0-50 rpm (variable frequency speed regulation), the rated power supply is 220V, the rated frequency is 50-60 HZ, the power of the whole machine is 1.5KW, the dimensions are 850 × 700 × 480mm, the size of the barrel is φ 400 × 240mm, and the weight is 178kg.
HuiNuo
CP3000-D
CP5000-D
CP2000-D
-
ANGNI AM300W-O Laboratory Electric Stirrer 50L/2000rpm
$ 1324.00 -
HUXI JB300-SH high power powerbasic stirrer Round six hole fan blade Impeller blade 100mm Rod length 500mm
$ 559.00 -
HUXI RWD100 Overhead Stirrer, Round Three Hole Fan Impeller Slurry 50mm Rod Length 500mm
$ 660.00 -
HUXI HJQ-2 Laboratory Stirrer Circular Six Hole Fan Sheet Impeller Slurry 100mm Rod Length 400mm
$ 1272.00 -
GUOHUA JJ-1 200W Overhead Stirrer
$ 254.00
Introduction
In order to meet the market demand and meet the higher requirements put forward by customers, the new generation of CP3000-D mixer is designed and produced. The operation is simple and convenient; Low-speed, intermittent mixing with the barrel; The unique stirring paddle design allows the ink to be turned and sheared during the stirring process, and the ink can be thoroughly stirred within ten minutes. The ink does not heat up after stirring. Easy to replace the barrel, (stainless steel barrel); The stirring speed can be adjusted by frequency conversion.
Application
Ink factory, paint factory, chemical factory, printing factory, screen printing factory, circuit board factory, garment factory, etc.
HuiNuo CP3000-D StirrerSpecifications
| LIST | VALUE |
|---|---|
| Barrel Volume | 30L |
| Barrel size | φ400×240mm |
| Speed range | 0~50rpm (variable frequency speed regulation) |
| rated Power Supply | Single phase 220V |
| Rated Frequency | 50 ∽ 60 HZ |
| Rated Power | 1.5KW |
| Dimension | 850*700*480mm |
| Weight | 178kg |
HuiNuo CP3000-D Stirrer Packing list
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.